Mitsubishi Electric MS-GF50VA - Инструкция по эксплуатации - Страница 8

En-7

● OPERATING INSTRUCTIONS ●

C

LEANING

Instructions:

•  Switch off the power supply or turn off the breaker before cleaning.

•  Be careful not to touch the metal parts with your hands.

•  Do not use benzine, thinner, polishing powder, or insecticide.

•  Use only diluted mild detergents.

•  Do not expose parts to direct sunlight, heat, or fi re to dry.

•  Do not use water hotter than 50°C.

Hole

Hinge

Air fi lter (Nano platinum fi lter)

• 

Clean every 2 weeks

•  Remove dirt by a vacuum cleaner, or rinse with water.

•  After washing with water, dry it well in shade.

What is “Nano platinum fi lter”?

Nano platinum is a ceramic particle that includes a platinum nanoparticle. 

The particles are incorporated into the fi lter material, which results in pro-

viding semi-permanent antibacterial and deodorizing characteristics for the 

fi lter.  Nano  platinum  surpasses  the  catechin  (a  biofl avonoid  that  is  found 

in green tea) in performance. Nano platinum fi lter uses this compound not 

only to improve air quality but also to eliminate bacteria and viruses. This air 

fi lter has a semi-permanent lasting effect even after washing it with water.

Air cleaning fi lter 

(Electrostatic anti-allergy enzyme fi lter, 

option)

Every 3 months:

•  Remove dirt by a vacuum cleaner.

When dirt cannot be removed by vacuum cleaning:

•  Soak the fi lter and its frame in lukewarm water before rinsing it.

•  After washing, dry it well in shade.

Every year:

•  Replace it with a new air cleaning fi lter for best performance.

•  Parts Number 

 MAC-2310FT-E 

 Important

• 

Clean  the  fi lters  regularly  for  best  performance  and  to 

reduce power consumption.

• 

Dirty  fi lters  cause  condensation  in  the  air  conditioner 

which  will  contribute  to  the  growth  of  fungi  such  as 

mold.  It  is  therefore  recommended  to  clean  air  fi lters 

every 2 weeks.

1.  Lift the front panel until a “click” is heard.
2.  Hold the hinges and pull to remove as shown in the left illustration.

•  Wipe with a soft dry cloth or rinse it with water.

•  Do not soak it in water for more than two hours.

•  Dry it well in shade.

3.  Install the front panel by following the removal procedure in reverse. Close 

the front panel securely and press the positions indicated by the arrows.

Front panel

JG79A935H02_en.indd   7

2016/07/01   14:08:06