Hyundai Electronics H-AR18-09H - Инструкция по эксплуатации - Страница 10

10

Electric  air conditioner (split system)

EN

Drying operation mode

1. Press the «MODE» button, select the drying operation mode.

2. Press the «ON/OFF» button, the air-conditioner starts to operate.

3. Press the «ON/OFF» button again, the air-conditioner stops.

Backlight function (for remote controllers with such function only)

The remote controller has a backlight which can be turned on by pressing 

any button for the convenience of operation in darkness. The backlight will be 

automatically turned off  if there is no operation within 10 seconds.

8. MAINTENANCE

Before cleaning unplug the conditioner.

Cleaning of the indoor unit and remote control board:

• 

Indoor unit and remote control board should be cleaned with a dry soſt  cloth.

•  If the indoor unit is too unclean, moisten the cloth with cold water.
•  In order to avoid the damage of paint or details of the conditioner, do not 

clean it with brushes and do not leave them on the surface of indoor unit.

•  In order to avoid the damage of surface or deformation of the conditioner 

details, do not clean it with petrol, solvents, cleaning powders or other 

chemically active substances.

Before a sustained interruption in the conditioner work:

•  Turn the conditioner on for several hours in the FAN mode. It will allow you 

to dry its inner cavities.

•  Unplug the conditioner.
•  Remove the batteries from the remote control board.

Cheks before starting:

• 

Make sure that an air fi lter is installed.

•  Make sure that air inlet and outlet grilles of the outdoor unit are not 

blocked by foreign objects.

Cleaning of air fi lter.

• 

Air fi lter cleans the air entering the conditioner from dust and foreign particles. 

If the fi lter is contaminated, the conditioner capacity decreases sharply.

• 

If the conditioner is operated permanently, the fi lter should be cleaned 

once per two weeks.

•  If the conditioner is installed in a room with dusty atmosphere, then the air 

fi lter should be cleaned more oſt en.

• 

To remove the fi lter, open the indoor unit panel.

• 

Remove air fi lters. Clean the fi lter with a vacuum cleaner or rinse it in clean 

water. If the fi lter is contaminated heavily, clean it with a soſt  brush and 

wash in diluted washing solution, then dry it in a cool place.