Hyundai H-ALD1-48H-UI043 - Инструкция по эксплуатации - Страница 6

8.

Electric  air conditioner. Split system

9.

Electric  air conditioner. Split system

EN

EN

REMOTE CONTROL

Work with remote control board

Mounting and replacement of batteries: mount two LR03 alkaline batteries, according to polarity 
indicated on the remote control board.
In order to avoid malfunction of the remote control board do not insert used batteries or batter-
ies of various types.
If the conditioner is not used for a long time, remove batteries from the board or else electrolyte 
may leak and damage the board.
In normal operation of the conditioner average service life of batteries will be about a half-year.

Replace batteries, if command receiving is not conirmed with an audio signal, or if the display 

does not show a sign of command transfer. When generating commands from the remote con-
trol board, point an IR-radiator at a remote-control signal receiver situated on the indoor unit. 
Hold the remote control board at the distance of no more than 8 m from the indoor unit. The re-
mote control board will not work, if there are any curtains, doors or other things between it and 
the indoor unit. Protect the board from water and exposure to direct sunlight and heat sources.

7. OPERATING MODES

«AUTO» mode

The auto mode is turned on and of with the use of the button «MODE

» on the remote control 

board.
1.  During operation in the AUTO mode, the set temperature is maintained. In this mode, the air 

conditioner automatically selects the COOLING, VENTILATION, or HEATING mode based on the 
set and current temperatures.

2.  In the automatic mode, the fan rotation speed is selected automatically and cannot be set 

manually.

3.  If the AUTO mode does not provide comfort conditions, select the mode manually. In auto-

matic mode, depending on air temperature in the room, the conditioner will select needed 
temperature parameters of its operation in the following order:

«COOL», «HEAT» and «FAN»

1. 

Turn the conditioner on pressing the «ON/OFF

» button.

2. 

Pressing the «MODE

» button, select COOL, HEAT or FAN mode manually.

3. 

Pressing the «TEMP

» button (up-down), set the desired air temperature indoors (except for 

FAN mode).

4. 

Pressing the «FAN SPEED

» button on the remote control board, select the fan rotation speed: 

AUTO, LOW, MIDDLE, HIGH, and the conditioner will start working in accordance with the 
selected setting.

5. 

To turn the conditioner of, press the «ON/OFF

» button once again.

In the «FAN» mode air temperature indoors is not set.

«DRY»

Turn the conditioner on pressing the «ON/OFF

»

 button. Pressing the «MODE

» button, select the 

DRY mode. The conditioner will start working in the set mode. To turn the conditioner of, press 
the «ON/OFF

» button once again.

«MAXI» mode («TURBO»)

When pressing the «MAXI

» button on the remote control board, the conditioner will start working 

in turbo mode  for maximum cooling (in cool mode) or for maximum heating (in heat mode).

Fig. 3

13

12

11

10

2

4

6

5

7

3

1

8

9

Indication of the control board display shall 
correspond to selected modes.

1. 

Button «ON/OFF». Using this button, you 

may turn the conditioner on or of.

2. 

Button «TEMP» (decrease) for setting of 

the required air temperature from 17 to 

30°С. Using this button, you may set the 

required air temperature indoors.

3. 

Button «MAXI». Using this button you 

may turn on and of Maxi mode.

4. 

Select-mode button «MODE». Using this 

button, you may select a required mode: 
Auto, Cool, Dry, Heat, Fan.

5. 

Button «SLEEP». Press this button to 

activate the economy mode. Press it 
once again to deactivate the mode. This 
function can be activated in the Cooling, 
Heating, and Auto modes.  

When the ON/OFF, FAN SPEED, SLEEP, 

or MODE button is pressed, this mode is 
automatically deactivated.

6. 

Button «SWING UP-DOWN». Using this 

button, you may regulate position of 
air-relief blinds and forward treated air 
to up and down.

7. 

Button «DISPLAY». Using this button you 

can may to clear the display on the indoor 
unit. Press it again to light the display.

8. 

Button «SWING LEFT-RIGHT». Using this 

button, you may regulate position of 
air-relief blinds and forward treated air 

to let and right.*

9. 

Button «SILENCE».** 

10. 

Button «TIMER OFF». Press this button to 

initiate the of-delay timer. Each pressing 

of the button increases the timer setting 
by 30 min. When the reading reaches 10 
hours, each pressing will increase the 
timer setting by 60 min. To deactivate 
the automatic timer function, set the 
value at 0.0.

11. Press this button to initiate the on-delay 

timer. Each pressing of the button 
increases the timer setting by 30 min. 
When the reading reaches 10 hours, each 
pressing will increase the timer setting 
by 60 min. To deactivate the automatic 
timer function, set the value at 0.0.

12. 

Button «SPEED». Using this button, you 

may select rotation speed of the indoor 

unit fan: «Auto», «High», «Middle», «Low».

13. 

Button «TEMP» (increase) for setting of 

the required air temperature from 17 to 

30°С. Using this button, you may set the 

required air temperature indoors.

*    only for ceiling-loor type

**  not used for this series