Ducky (DMFE20O) - Инструкция по эксплуатации - Страница 19

To enable the 6th and 7th button function

Operation : In the right-hand mode, please press the 6th + the middle button for 3 seconds, 

the mouse will flash white light 2 times, that is to enable the function of the 6th and 7th  

button for key switching operation. 

Default: Right-Hand Mode

Right / Left - Hand switch operation (note that the side keys 

will follow the switch operation at the same time  

1. 

Default : Right - Hand mode 

2. 

The 6th button in the right - hand mode is the start up key 

    for switching functions 

3. 

Operation : 

Press and hold the 6th button for 3 seconds the whole mouse keeps 

    flashing red light (blinking once every 2 seconds) then press the 

    left 

→ 

right button in sequence the mouse flashes white light 1 to 

    restore the current light Complete the setting. (If you switch to 

    left - hand mode the 6th button is also the switch start key the entire 

    mouse continues to flash red (blinks once every 2 seconds) press the 

    left 

→ 

right button in sequence then switch back to right - hand mode ) 

Function Mode : The 7th button  

1. Default : Non - functional  

2. Operation : Press and hold the 7th button for 3 seconds the whole 

    mouse keeps flashing red light (blinking once every 2 seconds) then 

    the function mode will be enabled. The 7th button will be switched to 

    the function key replace 

→ 

Fn key. (To cancel the Fn key press the 

    Fn key again for 3 seconds. After the entire mouse blinks green light 

    twice the current light value will be restored. The Fn key will return 

    to the default 7th button.