2E (MGHSPR) - Инструкция по эксплуатации - Страница 15

14

15

EN

QUICK START GUIDE 

Mouse Instructions: 

1. Remove the USB Nano receiver 

2. Plug the receiver into your computer USB port 

3.

Turn on the mouse by switching on the power switch at the bottom of the mouse 

4. Wait for the computer installation to finish 

DPI setting and Indicator: 

1. Default DPI levels: 800-1200-2400-3200-6400-19000 DPI levels 

2. Press the DPI button on the top of the mouse to cycle through the DPI levels

3. The mouse scroll wheel LED color indicates the DPI level

800DPl: Red Color Breathing,  1200DPl: Yellow Color Breathing(default),        

2400DPl: Green Color Breathing,  3200DPl: Purple Color Breathing,

6400DPl: Blue Color Breathing,  19000DPl:  Blue ness Color Breathing,

Note:

1. DPI levels can be adjusted by the software. Max DPI is 19000DPI 

2.

DPI LED effects can be adjusted or turned off to save power by the software

Polling Rate: 

125-250-500-1000 Hz can be set by the software. Default polling rate is 500Hz 

Polling rate LED color: 

125 red color, 250 blue color, 500 green color, 1000 purple color

Power switch function:

1. Switch at Position 7 : Turns on the mouse with RGB LED on 

2. Switch at Position 8 : Turns on the mouse power with RGB LOGO on

3. Switch at Postion 9: Turns off the mouse

**Note** If you want to turn on the LED in wired mode, you will need to turn on the LED in 

wireless mode first