Bort BLK-700×2 - Инструкция по эксплуатации - Страница 5

5

GB

•  When the required pressure level is reached, 

disconnect the compressor from the car lighter 
socket. 

•  Disconnect the air hose with the adapter from the 

in

fl

 ated  object.

•  Quickly close the air passage of the in

fl

 ated  ob-

ject.

ATTENTION!

 Control air pressure in the in

fl

 ated  ob-

ject. Avoid excessive pressurization of the in

fl

 ated 

object. 

NOTE:

 Some compressors are supplied in optional 

design. In this case on the side of the compressor 
body, there is an additional socket, similar with the 
car lighter socket. Having connected the compressor 
to the car lighter, with this additional socket you can 
connect additional devices.

ATTENTION!

 Do not use the compressor with addi-

tional devices. Power consumption in this case may 
be very high. As a result, the adapter or the lighter 
socket may be damaged, and a fuse of the car sys-
tem may get blown or the accumulator may get dis-
charged.

Troubleshooting guide
1. The compressor is not started on

Blown-out fuse in the car

- Replace the blown-out fuse in the fuse box of the 
car.

Poor contact in the lighter socket

- Clean the lighter socket with a non-metal object.

2. The compressor is working poorly

The car accumulator is discharged

- Start the car.

Poor contact in the lighter socket

- Clean the lighter socket with a non-metal object.

Cleaning

Every time after completion of work, it is recom-
mended to clean the body of the car compressor and 
its air inlets from dirt and dust with a cotton cloth or 
a napkin.
Persistent impurities must be removed with a cloth 
soaked in soapy water.
It is prohibited to use solvents: alcohol, ammonia so-
lutions, etc. for dirt removal. These 

fl

 uids  adversely 

affect plastic parts of the compressor.

To prevent failures

•  Keep the compressor adapter clean. With the 

compressor connected to the car cigarette lighter, 
in case of short circuit, a life-threatening situation 
may occur. Accumulator capacity is very high, so 
you can get injured.

•  Protect the compressor from overheating. Do not 

cover the compressor with foreign objects while in 
use.

Before connecting, please check

•  If the adapter and the car lighter socket match;
•  If the car accumulator voltage matches with the 

compressor's characteristics;

•  If the accumulator can provide 10 A;
•  Absence of failures and breakdowns in the cable 

and the adapter for the cigarette lighter.

OPERATION

First, check pressure in the in

fl

 ated object. It can be 

done with the manometer, installed in the compres-
sor. Just connect the hose of the idle compressor to 
the in

fl

 ated  object.

Avoid excessive pressurization.
Do not place the working compressor in the car com-
partment.
Do not leave the working compressor unattended.
Switch off the compressor immediately in the follow-
ing cases: 
1. If the adapter or power cable is damaged;
2. Smell of burning insulation appears.

ATTENTION! 

This compressor is intended for short-

time operation (not more than 10 minutes). Longer 
operation of the compressor may cause its overheat-
ing and breakdown. If you need to use the compres-
sor longer, after 

fi

 rst 10 minutes switch off the device 

and let it cool down for 10 minutes before restart.

WARNING!

 The valve cover shown on the 

 2 

 be-

comes very hot during operation. Do not touch this 
cover to avoid risk of burns!

In

fl

 ation of car tires

•  Place the car to ensure the lowest position of the 

tire valve.

•  Connect the nipple to the tire valve. Push the lever 

down and 

fi

 x the nipple.

•  Check pressure with the manometer.
•  Connect the compressor to the car lighter socket. 
•  When the required pressure level is reached, 

disconnect the compressor from the car lighter 
socket. 

•  Release the lock of the joining nipple and remove 

it from the valve.

In

fl

 ation of balls and toys

•  Install the valve adapter (connector or needle for 

ball in

fl

 ation) on the nipple and latch the lock by 

pushing the lever down.

•  Connect the air hose with the adapter to the in-

fl

 ated  object.

•  Connect the compressor to the car lighter socket. 
•  Turn the compressor on.