TEFAL Sense CM693110 - Инструкция по эксплуатации - Страница 5

9

8

EN

DESCRIPTION

PROGRAMMING THE CLOCK

A  Appliance body

B  Lid

C  Water container

D  Water level gauge

E  Carafe lid

F  Carafe handle

G  Carafe

H  Heating plate

I  Filter holder

J  ON/OFF button 

K  CLOCK button 

L  HR button

M  MIN button

N  AROMA button

O  PROG button

P  Spoon

• Place the coffee maker on a hard, flat surface.

• Plug the power cable into a 220 V - 240 V wall outlet.

– When you plug in the coffee maker for the first time, 

12:00

 AM 

appears and blinks on the screen. 

Fig. 1

. Set the hour by pressing 

the HR button 

(L)

 for the hours and MIN 

(M)

 button for the minutes. 

The time appears. It is automatically confirmed after 5 seconds have 

elapsed or by pressing 

the CLOCK button (O).

Note:

 Your clock is now set and will continue to display the current time 

even when your appliance is in standby mode. If you want to set the time 

again, press the CLOCK 

(O)

 button and repeat the steps above.

If the unit is unplugged or if there is a power failure, the clock will return 

to 12:00 AM. The above instructions must be repeated to program the 

clock again.

BEFORE USING FOR THE FIRST TIME

• Remove the stickers from the machine.

• Prior to first use, run your coffee maker without any coffee to rinse the 

circuit. Fill the water reservoir up to the maximum level and start a cycle 

by pressing on the ON/OFF button 

(J)

.

IMPORTANT:

 Your appliance has been designed to operate using only 

cold or warm water.

• All appliances are subject to strict quality control procedures. These 

include actual usage tests on randomly selected appliances, which 

would explain any traces of use.

• Always close the lid when running the coffee maker.

• Do not brew coffee if the carafe already has coffee in it.

• To prevent any overflow, the carafe must be placed on the heated base 

of the coffee maker, otherwise there could be some overflow of hot 

water or hot coffee. 

• The coffee maker becomes very hot during the infusion cycle. Please 

handle it with care. 

• Do not disassemble the appliance.

• Do not use the jug without the lid.

• Do not pour hot water in the tanks.