Кофеварка Scarlett SC-CM33016 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
IM021
www.scarlett.ru
SC-CM33016
5
•
For small cups use the special base which is connected to the central part of appliance in the cavity.
•
Plug the coffee maker.
•
The coffee maker is ready for use.
ESPRESSO COFFEE
•
Espresso is a unique method of coffee brewing in which hot water is forced through ground coffee under high
steam pressure. It will give a delicate aroma and brilliant taste.
•
Turn the mode switch to the «0» position and push the start button.
•
LED light indicator will flash blue and start to pre-heat the water, as soon as the device has heated up,
LED light indicator stops flashing and keeps blue, it is ready for operation.
•
Turn the mode switch to the position « », coffee brewing will start, the LED light indicator keeps blue.
•
Follow the process of filling the cup.
•
While reaching desired coffee volume, turn the mode switch back to the «0» position-this is the standby mode.
•
Use freshly ground coffee suitable for Espresso coffee only.
•
Tamper the ground coffee slightly. This can be done with down side of the measuring spoon.
•
Coffee strength will depends on the coffee quality and type of coffee beans grinding.
•
ATTENTION: Do not touch hot surface.
•
After set ON/OFF control knob in the position “0” and cool funnel it can be remove. For this turn the funnel
clockwise to the position
.
•
For next using leave unit for about 5 minutes so that the unit could warm cold water.
•
ATTENTION: During brewing process, the water is forced through ground coffee under high steam pressure. At
this point you cannot remove the basket with the filter and open the cover.
BREWING CAPPUCCINO
•
Cappuccino is espresso topped with steamed and frothed milk.
FILLING THE MILK TANK
•
Remove the milk tank from the base by pushing the button of removing the milk tank.
•
Remove the lid of the milk tank by pushing the button of opening the lid.
•
Fill the tank with milk until needed level but before the MAX mark.
•
Put the lid of milk tank by latching the button of lid removing. Make sure that ledges of the lid are aligned with
appropriate grooves on the milk tank. If the lid is placed correctly, you will listen the flip.
•
Place the milk tank to the unit. Under the correct placement you will listen the flip.
•
It is possible to increase the volume of milk foam or to add more hot milk to coffee by means of foam adjustment
on the milk tank
•
Turn the foam adjustment to the right for adding the milk foam during operation.
•
Turn the foam adjustment to the left for adding the hot milk during operation.
•
Place the regulator of milk spout position so that the milk falls into the cup by mean of regulator of milk spout
position.
•
Press the switch button and turn the mode switch to the position. Coffee maker will start to make lather and
warm the milk moving it into the cup.
•
To stop the process turn the mode switch to the “0” position.
•
To switch off the unit press the ON/OFF button.
•
If the coffee brewing is not finished coffee maker will be turned off automatically after 45 seconds. If a coffee
maker have no operation in "0" mode for more than 10 minutes it will be turned off automatically.
•
Milk fluffing system will be turned off automatically after 70 seconds since the operation starts.
CLEANING AND MAINTENANCE
•
Do not forget to unplug the appliance from the power supply before cleaning.
•
Let the appliance to cool down, and then wipe outside with a soft dry cloth. Do not use detergent or abrasives.
•
Wash all detachable parts with hot soapy water, then rinse and dry before fitting to place.
FAST CLEANING
•
It is necessary to clean the milk tank after each using so that the left milk does not spoil inside the tank during
storage.
•
Fast cleaning can be arranged after each using.
•
Fill the both tanks with water.
•
Place the milk spout above the tank as it was described before.
•
Press the ON/OFF button to switch off the appliance.
•
Turn the mode switch to the « » position.
•
Coffee maker will start to leak hot water instead of milk thereby to clean the tank and spout.
•
Upon finishing o cleaning switch off the appliance as it was described before.
DESCALING
•
Descale your coffee maker regularly.
•
Operate the appliance as described. Add proper descaling remedy, available at the market to the water tank and
do not fill the filter with ground coffee. Follow recommendations given.
•
Clean the coffee maker about every 5 months to keep high efficiency.
•
Step1 :
1.Fill in the water tank and milk container with detergent or water till Max mark.
2.Put the filter into the porta-filter. Position the holder to the unit.
