Russell Hobbs 24031-56 - Инструкция по эксплуатации - Страница 4

4

3.  Fill the reservoir with the exact amount of water required. Note that the brewing process 

will use all of the water that you put in the reservoir.

4.  Make sure that the filter holder is pressed down all the way into position. It will click when 

correctly installed. 

5.  Put a #4 paper filter into the filter holder.

6.  The reservoir is calibrated to give 10 large cups (at 125ml per cup) and 15 small cups (at 83ml 

per cup). For each large cup, add 6g of ground filter coffee and for each small cup add 4g.

7.  Close the lid.

8.  Replace the carafe on the hotplate.

SET THE CLOCK

It isn’t neccessary to set the clock to use your coffee maker but you will need to set it if you want 

to use the timer functions.

1.  Put the plug into the power socket.

2.  Use the 

hr

 and 

min

 buttons to set the correct time in 24 hour format.

• 

The clock will retain its settings until the coffee maker is unplugged.

• 

To change the time, press the 

T

 button. The time will flash. Use the 

hr

 and 

min

 buttons to 

set the new time. If you don’t press either the 

hr

 or 

min

 buttons within 3 seconds, the 

coffee maker will revert to normal, and the current time will show.

MAKING COFFEE

1.  Press the 

1

 button – the 

1

 icon will appear on the display. 

2.  Shortly afterwards, coffee will start to drip into the carafe.

3.  If you want to stop the coffee maker while it’s brewing, press the 

1

 button.

4.  Once brewed, the hotplate will keep the carafe warm for up to 40 minutes.

USING THE TIMER

Note: Make sure the clock is set to the correct time. Use the 

h

 and 

min

 buttons.

1.  Set the timer to the time you want to start brewing.

a)  Press and hold the 

T

  button until the 

T

 icon flashes on the display.

b)  Use the 

h

  and 

min

 buttons to set the time you want brewing to start.

If you don’t press either the 

hr

 or 

min

 buttons within 3 seconds, the coffee maker will 

revert to normal, and the current time will show. Press the 

T

 button to start again.

2.  When the time is programmed, press the 

1

 button. The 

T

 icon will appear on the display. 

Your coffee maker is now set to make coffee at the selected time.

• 

If you want to check the program time press the 

T

 button. The programmed time will 

show for 3 seconds and then return to the time of day. 

• 

If you want to cancel the timer before brewing has started, press the 

1

button.

• 

If you want to stop the coffee maker while it’s brewing, press the 

1

 button.

KEEP WARM/AUTO SHUT-OFF

1.  Your coffee maker will keep the coffee warm for about 40 minutes. 

2.  40 minutes  after brewing your coffee maker will shut down and the time of day will be 

displayed. 

3.  To wake the appliance, press the 

min

 button.