Philips HD8705 - Инструкция по эксплуатации - Страница 11

,

Place 2 SENSEO

®

 coffee pods in the 2-cup pod holder 

°°

. 

Note: Make sure the coffee in the pod(s) is evenly distributed and press the 

pod(s) lightly into the pod holder.
Note: Never put normal ground coffee or use torn pods in the 

SENSEO

®

 machine, as this causes it to become blocked.

  7 

 Close the lid and lock the lever.

Always make sure the lid is properly locked. Push the lever down until it 

snaps home with a click. 

Never start brewing with the lid open. The lid must be properly closed.

  8 

 Place one cup or two cups under the spout openings.

The cups you use should have a capacity of at least 150ml. Do not use 

cups that are too large, as they cause the coffee to get cold more quickly.

  9 

 Press the button that indicates the number of cups of SENSEO

®

coffee you want to brew. 

 -

°

 for one cup 

 -

°°

 for two cups 

,

The SENSEO

®

 coffee machine starts brewing. 

 - The machine automatically supplies the optimal amount of water.

 - You can interrupt the brewing process at any time by pressing the 

on/off button 

I

. If you switch the machine back on after you have 

interrupted the brewing process, the machine does not complete the 

interrupted brewing cycle. 

Do not remove the water reservoir during a brewing cycle, as 

this causes the machine to draw in air. When this happens, the next cup 

will only be partly filled.

Note: If you only get a small quantity of coffee or no coffee at all out of the 

machine, you have not flushed the machine properly before first use. As a 

result, the boiler is not or not completely filled. Flush the machine properly 

(see chapter ‘Preparing the machine for use’) before you brew another cup of 

coffee. 

 10 

 After use, lift the pod holder out of the machine and remove the 

coffee pod(s).

CLI

CK

EnglisH

11