Philips HD8425 Saeco Poemia - Инструкция по эксплуатации - Страница 12

• 12 •

-  wash the steam wand with a wet cloth and remove any 

milk residue;

- refi t the upper part in the steam wand (make sure it is 

completely inserted);

Reassemble the external part of the Pannarello.

• 

(Fig.34) - 

Empty and clean the drip tray every day.

•  Use a soft, dampened cloth to clean the appliance.
• 

(Fig.20) - 

Perform the following operations to clean the 

pressurized fi lter holder:

- 

(Fig.9)

 - remove the fi lter and wash it thoroughly with hot 

water.

-  remove the adapter (if any) and wash it thoroughly with 

hot water.

-  wash the internal part of the pressurized fi lter holder.

•  Do not dry the machine and/or its parts using a microwave 

and/or standard oven.

• 

(Fig.35-36) - 

Clean the seat for accessories with a damp 

cloth every week to remove any coff ee or dust residues.

Note: do not wash the pressurized fi lter holder 
in the dishwasher.

11 DESCALING

Limescale builds up with the use of the appliance; the machine 
needs descaling every 1-2 months and/or whenever a reduc-
tion in water fl ow is noticed. Use the Saeco descaling product 
only.

In  case  of  confl ict,  priority  must  be  given  to 
what is indicated in the operation and mainte-

nance manual over the instructions provided on sepa-
rately sold accessories and materials.

Use the Saeco descaling product (Fig. B). Its 
formula has been designed to ensure better 

machine performance and operation for its whole op-
erating life. If correctly used, it also avoids alterations 
in the brewed product. Before starting a descaling cy-
cle make sure that: THE WATER FILTER (if used) HAS BEEN 
REMOVED.

Never drink the descaling solution or any prod-
ucts dispensed until the cycle has been carried 

out to the end. Never use vinegar as a descaling solu-
tion.

1 (Fig.13-14) 

- 

Insert the fi lter holder into the brew unit (8) 

from the bottom and turn it from left to right until it locks 
into place.

2 (Fig.1B) 

- 

Remove and empty the water tank.

3 (Fig.2) 

- 

Pour 

HALF

 the content of the Saeco concentrated 

descaling solution into the water tank, then fi ll the tank 
with fresh drinking water up to the MAX level.

4

  Turn on the machine by pressing the ON/OFF button (11). 

The indicator light (18) turns on.

 (Fig.21) 

- 

Fill up (as described in chapter 7 of the manual) 

2 cups of water (about 150 ml each) from the steam / hot 
water wand and turn off  the machine by pressing the

ON/

OFF button (11); the light (18) turns off 

5

  Let the descaling solution take eff ect for approx. 15-20 

minutes with the machine turned off .

6

  Turn on the machine by pressing the ON/OFF button (11).

(Fig.21) - 

Fill up (as described in chapter 7 of the manual) 

2 cups of water (about 150 ml each) from the steam / hot 
water wand. Then turn the machine off  by pressing the 
ON/OFF button (11) and leave it off  for 3 minutes.

7

  Repeat the operations described in 

step 6

 until the water 

tank is completely empty.

8 (Fig.2) 

- 

Rinse the water tank with fresh drinking water 

and fi ll it completely.

9

  Place a container under the fi lter holder.

10

  Switch on the machine by pressing the ON/OFF button (11); 

turn the selection knob (17) to the "

" position and, by 

means of the fi lter holder, dispense the whole content of 
the tank. Set the selection knob (17) to the " " position to 
stop dispensing.

11  (Fig.2)

 - Fill the tank again with fresh water. 

 (Fig.21)

 - Place a large enough container under the steam 

wand (Pannarello). Open the water dispensing knob (3) by 
turning it counter-clockwise. 

(Fig.22)

 - Turn the selection knob (17) to the "

" posi-

tion and dispense the whole content of the tank by means 
of the steam / hot water wand.

12 (Fig.23)

 - After dispensing water, set the selection knob 

(17) to the " " position to stop dispensing. 

(Fig.24)

 - Close the water dispensing knob (3) by turning it 

clockwise. 

13

  Repeat the operations from 

step (8)

 once again, for a total 

of 4 tanks.

14  (Fig.19) - 

Remove the fi lter holder from the unit by turning 

it from right to left and rinse it with fresh drinking water. 

The descaling cycle is now complete.

(Fig.2)

 - Fill the tank again with fresh water. If necessary, 

prime the circuit as described in section 4.5.

The  descaling  solution  is  to  be  disposed  of  ac-
cording to the manufacturer’s instructions 

and/or the regulations in force in the country of use.