Electrolux EKF3330 - Инструкция по эксплуатации - Страница 6

6

www.electrolux.com

ENGLISH

Thank you for choosing an Electrolux product. In order to ensure the best results, always use original 

Electrolux accessories and spare parts. They have been designed especially for your product. This product 

is designed with the environment in mind. All plastic parts are marked for recycling purposes.

COMPONENTS

A

.  ON/OFF switch with power indicator light

B

.  Water tank

C

.  Water level indicator

D

.  Hinged lid

E

.  Filter holder with anti-drip valve

F

.  Coffee jug with graduation on both sides

G

.  Warming plate 

H

.  Power cord & plug

Picture pages 2-3

GETTING STARTED

1 

Place the machine on a flat surface. 

When starting the machine for the first time,

 fill the tank with cold 

water. Start the machine with the ON/OFF switch. Let a full tank of water pass through the machine once 

or twice to clean it, without using paper filter or coffee.

2 

Making coffee:

 open the lid and fill the water tank with fresh cold water up to the desired level. There is 

a gauge for cups on the water tank and on the coffee jug. (

The machine must not be used with empty 

tank!

)

3 

Insert a size 1x4 paper filter in the filter holder

 and fill it with ground coffee. For average strong coffee 

one measuring spoon (approx. 6-7 g) per cup is sufficient. Close the water tank lid and place the jug 

(complete with lid) onto the warming plate. 

4 

Start the machine

 with the ON/OFF switch. The power indicator light will come  on and hot water will 

flow into the filter. When water has stopped flowing, the warming plate keeps the coffee hot until the 

machine is turned off with the ON/OFF switch. If the machine is not turned off manually, the Safety 

Auto-Off function turns it off after 40 minutes.

5 

If the jug is removed,

 the filter valve prevents coffee from dripping onto the warming plate. (

While boil-

ing, the jug must not be removed for longer than 30 seconds or the filter will overflow.

)

CLEANING AND CARE

6 

Turn the machine off and unplug the power cord.

 Wipe all outer surfaces with a damp cloth. Coffee 

jug and jug lid are dishwasher proof. 

Never use caustic or abrasive cleaners, and never immerse the 

machine in liquid

! 

7 

To clean the filter holder,

 lift up the handle and remove the filter holder. To clean the filter valve thor-

oughly, rotate it several times while it is being rinsed.

8 

Decalcifying

 is recommended regularly, depending on water hardness. Fill the tank with water and 

decalcifier according to product instructions, then follow steps 9 and 10.

9 

Place the coffee jug with its lid

 onto the warming plate. Allow the decalcifier to take effect for about 

15 minutes, then switch the machine on. Switch it off when the solution has finished flowing through. If 

necessary repeat the decalcifying process.

10 

Allow the machine to run at least twice with plain water.

 Then thoroughly rinse the coffee jug, lid and 

filter holder under running water, activate the filter valve repeatedly during the rinse process.

Enjoy your new Electrolux product!