Deerma DEM-YS10W - Инструкция по эксплуатации - Страница 4

Co

ff

ee making button

(Two color LED: white and red )

2

Preheating And Cooling State

4

Power button

1

Co

ff

ee standby mode

3

Steam making status

5

1. When the knob is in standby preheating and cooling state “      ”, press the 

power button: the power indicator “     ” is always light on, the coffee 

indicator “     ” flashes in white and red, when NTC senses the set 

temperature --- the power indicator “     ” and coffee indicator “      ” (white 

light) both are always light on, enter coffee brewing selection or steam 

selection mode.

Note: Don’ t detect the heating tube power or current change after turning 

on the power for 5s, the power and coffee indicator lights give an alarm 

alternately.

2. When the knob isn’t in standby preheating and cooling state       , press 

the power button: the power and coffee indicator lights flash alternately for 

alarm. At this time,turn the knob back to the  preheating and cooling state               

to complete the continuous heating process.

Operation instructions

1

2

3

5

4

The coffee indicator light 

flashes slowly in white 

and red

The two lights are 

always on to enter the 

normal selection mode

The two indicator lights 

flash alternately and rapidly

The knob is not in 

preheating and cooling state

When the power indicator “     ” and coffee  indicator “     ” are always on , 

enter the coffee brewing selection mode.
Note: In order to ensure the quality, we recommend that users perform a 

self-check mode before making coffee (refer to the introduction of coffee 

brewing method for details)

1. Turn the knob to the Coffee standby mode“     ”，lock the filter handle 

which with powder (7-8g) on the water outlet of the machine, press the 

coffee button once, “     ” the coffee light(white light) flashes, at this time, the 

water pump starts the setted single cup program, the water pump works for 

2S, stops for 2S, and then works for 18S continuously, automatic stop after 

brewing for 40-60ml, the coffee indicator“     ”(white light) is always on. Turn 

the knob to the preheating and cooling mode      , then unscrew the filter 

handle, pour out the coffee grounds, and clean the residual coffee grounds 

in the filter cup.

2. Turn the knob to the Coffee standby mode“     ”，lock the filter handle 

which with powder (14-16g) on the water outlet of the machine, double 

click the coffee button, “     ” the coffee light(red light)flashes, at this time, 

the water pump starts the setted double cup program, the water pump 

works for 2S, stops for 2S, and then works for 40S continuously, automatic 

stop after brewing for 80-120ml,the coffee indicator“     ” (red light) is always 

on. Turn the knob to the preheating and cooling state mode       ,then 

unscrew the filter handle, pour out the coffee grounds, and clean the 

residual coffee grounds in the filter cup.
3. Enter the coffee preheating cycle heating process, the power indicator 

“     ” and coffee indicator “     ” are always light on.

Coffee Brewing Method

Note: Turn the knob back to the preheating and cooling state      , then can 

enter normal preheating mode.

3. Turn on the power and press the power button“     ”, the product is 

heating normally. If the product is not used by consumers for 20mins, the 

product will power off automatically.If need continue to use , press the 

power button “     ” again to restart the product.

Turn to coffee 

standby mode

Turn the knob back to 

the preheating and 

cooling state

05

06