Кофеварка Ardesto ECM-E10B - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
EN
12
Before first use
Make sure that the water tank is filled with water till max mark.
Place a cup right under the machine.
Plug on and turn on the machine. The start button on the control panel will flash red and
blue by turns. Press start button, the unit will start pumping a small amount of water. Wait
till the water finishes, then the unit will enter pre-heating and standby mode.
How to use
Espresso
Plug in. Switch on the unit.
Rotate the knob to the middle position to start the preheating. The start button will keep
flashing during preheating.
Once preheating completed, the start button will be on.
The unit will dispense a few amount of water to the drip tray, when the machine is finished
the coffee brewing or steam making and the knob is rotated to middle position. This is
normal.
1.Fill in the water tank with water till Max mark. Never overfill the Max mark.
2. Select the desired filter and insert it to the porta-filter.
3. Use the coffee spoon to measure the quantity of fine ground coffee powder you want to
the filter. Evenly press down the coffee powder in the filter with the flat end of the coffee
spoon. Insert the porta-filter in the machine with the handle pointing to the left, turn the
handle to right until lock well with shower head.
4.Place the cup onto the drip tray grid and right under the coffee outlet.
5.Rotate the knob to coffee function. Press down the start button. The button will start to
flash and the unit will start the pre-brewing for 3 seconds and then coffee brewing.
6.While reaching desired coffee volume, press start button again , the machine stop to
brew coffee, and the start button keep illuminate by blue again, rotate again the knob to
the middle position to enter Standby mode.
7.Remove the porta-filter clockwise to detach.
8.Clean the porta-filter and dry it after use.
Now you can enjoy your own Coffee!
Setting the volume of the portion
The coffee volume is set by default: 10 ml.
In order to change the settings, we must hold down the start button for preparing the
drink until we get the desired volume in the cup.
After that, you can press the start button for a short time, the coffee maker will pour as
much drink as we set before.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
