Ariete 1358/11 MOKA REGULAR - Инструкция по эксплуатации - Страница 15

15

en

TrOubleshOOTInG

Warning!

Immediately turn the machine off if there are operational problems. Unplug it from the electric outlet. 

Wait for the machine to cool down. As an alternative, use gloves or rags to unscrew the boiler from 

the carafe.

Problems

Causes

Solutions

The coffee does not 

come out

There is no water in the 

boiler.

Repeat the operation by putting the right amount of 

water into the boiler.

Coffee comes out 

from the edges of the 

boiler.

Probably too much ground 

coffee was put in the funnel 

filter, and it prevented the 

boiler from being completely 

tightened to the carafe.

Repeat the operation by putting the right amount of 

coffee into the funnel filter.

Residue of ground coffee is 

on the seal.

Clean the seal with a toothpick or a sponge.

The exit holes of the disc 

filter (D) are clogged.

Turn off the machine. Unplug it from the socket-

outlet. Use gloves or rags. Wait for the machine 

to cool down. Unscrew the boiler from the carafe. 

Remove the filter from the carafe. Clean the 

clogged disc filter (Fig. 5) holes using using a small 

brush or pin.

The seal is burnt or torn

Replace the seal.

The carafe has not been 

tightened to the boiler.

Screw the carafe onto the boiler tightly. Do not prize 

the handle.

The coffee is not 

supplied or flows too 

slowly.

The exit holes of the disc 

filter (D) are clogged.

Turn off the machine. Unplug it from the socket-

outlet. Use gloves or rags. Wait for the machine 

to cool down. Unscrew the boiler from the carafe. 

Remove the filter from the carafe. Clean the 

clogged disc filter (Fig. 5) holes using using a small 

brush or pin.

The coffee blend is ground 

too fine.

Try using coarser coffee blends.

The coffee blend is pressed 

down too much.

Put a smaller amount of coffee into the funnel filter.

Lime has formed on the 

bottom of the boiler.

Descale as instructed in the paragraph “Cleaning 

the appliance”.

The coffee is too 

watery and cold.

The blend has been ground 

too coarsely.

A more finely ground blend must be used to obtain 

a more concentrated and hotter coffee.

Too much water has been put 

inside.

Repeat the operation by putting the right amount 

of water into the boiler. Up to the safety valve if the 

four cups of coffee funnel filter is used. Beneath the 

safety valve if the two cups of coffee adaptor disc is 

used (Fig. 2).