Taurus GR 0203 - Инструкция по эксплуатации - Страница 8

- Keep the working area clean and well lit. Clutte-

red and dark areas invite accidents.

- Do not place the appliance on hot surfaces, 

such as cooking plates, gas burners, ovens or 

similar.

- Do not place the appliance in an oven cavity or 

similar.

- Keep children and bystanders away when using 

this appliance.

- The appliance must be used and placed on a 

flat, stable surface.

- Do not use the appliance if the cable or plug is 

damaged.

- If any of the appliance casings breaks, immedia-

tely disconnect the appliance from the mains to 

prevent the possibility of an electric shock.

- Do not use the appliance if it has fallen on the 

floor, if there are visible signs of damage or if it 

has a leak. 

- Do not force the power cord. Never use the 

power cord to lift up, carry or unplug the 

appliance. 

- Do not wrap the power cord around the applian-

ce.

- Check the state of the power cord. Damaged 

or tangled cables increase the risk of electric 

shock.

- The appliance is not suitable for outdoor use.
- Supply cord should be regularly examined for 

signs of damage, and if the cord is damaged, 

the appliance must not be used.

- Do not use or store the appliance outdoors.
- Do not leave the appliance out in the rain or 

exposed to moisture. If water gets into the 

appliance, this will increase the risk of electric 

shock.

- Do not touch the plug with wet hands.
- Take the necessary measures to avoid starting 

the appliance involuntarily.

USE AND CARE:

- Fully unroll the appliance’s power cable before 

each use.

- Do not use the appliance if its accessories are 

not properly fitted.

- Do not use the appliance if the on/off switch 

does not work.

- Do not move the appliance while in use.
- Do not force the appliance’s work capacity.
- This appliance should be stored out of reach of 

children and/or the disabled.

- Keep the appliance in good condition. Check 

that the moving parts are not misaligned or jam-

med and make sure there are no broken parts 

or anomalies that may prevent the appliance 

from operating correctly.

- Never leave the appliance connected and unat-

tended if is not in use. This saves energy and 

prolongs the life of the appliance.

SERVICE:

- Make sure that the appliance is serviced only 

by specialist personnel, and that only original 

spare parts or accessories are used to replace 

existing parts/accessories. 

- CAUTION: There is a risk of fire if the 

appliance’s cleaning is not done according to 

these instructions.

- Any misuse or failure to follow the instruc-

tions for use renders the guarantee and the 

manufacturer’s liability null and void. 

INSTRUCTIONS FOR USE

BEFORE USE:

- Make sure that all the product’s packaging has 

been removed. 

- Before using the product for the first time, clean 

the parts that will come into contact with food in 

the manner described in the cleaning section.

- WARNING: Do not use without tank properly 

positioned. As described in section of assembly 

the tank

ASSEMBLING OF THE HOPPER: (FIG. 1)

- Due to transport, the hopper comes dismantled
- Unscrew the screw fixed on the mill holder
- Put the hopper on the mill holder and be sure 

that holes are aligned

- Place again the screw.

GRINDING SIZE REGULATOR:

- The suitable grinding size depends on the 

characteristics of the bean, humidity and toast. 

Not all types of coffee have the same charac-

teristics, so is recommendable to do a trial run 

with each coffee batch and if necessary adjust 

the grinding size.

- To select the finest ground size, turn the knob 

regulator clockwise

- To select more coarsely ground size, turn the 

knob regulator anticlockwise

- If is difficult turn the knob, probably a rest coffee 

bean locks the mill. Connect the appliance and 

switch ON few seconds