Smeg CGF01WHEU - Инструкция по эксплуатации - Страница 19

4 - EN

DESCRIPTION OF THE 

APPLIANCE (Fig. A)

1

  Motor base

2

  Coffee bean container (350 g)

3

  Coffee bean container lid

4

  Ground coffee container with lid

5

  Container support plate

6

  START/STOP button

7

  Grinding functions selection knob

8

  Grinding level adjustment lever

9

 Grinder

10

  Cleaning brush

11

  Centring filter support

IDENTIFICATION PLATE

The identification plate states the technical 

data, serial number, and marking. The 

identification plate must never be removed.

BEFORE FIRST USE 

(Fig. A)

•  Unpack the appliance carefully and remove 

all packaging materials and promotional 

labels.

•  Wash all components, except for the motor 

base (1) and the grinder (9), with hot water 

and normal washing-up liquid. Rinse all 

components thoroughly and dry them before 

using them.

 T h e   g r i n d e r   m u s t   n e v e r   b e 

washed and must always be kept 

dry. Clean the grinder with the 

cleaning brush provided or with 

a hard-bristle brush. 

Before use, check that all components 

are integral and have no cracks.

ASSEMBLY OF COMPONENTS

(Fig. B-C-D)

•  Place the container (2) on the motor 

b a s e   ( 1 )   m a t c h i n g   u p   t h e   t w o 

r e f e r e n c e   n o t c h e s   “

”   “

” 

 on the left side of the motor body (1). 

  Next rotate the container (2) clockwise until 

the two “

” “

” indications match.

•  Position the lid (3) on the container (2) and 

press it down. 

•  Position the plate (5) on the motor base (1) 

in a way to secure it.

•  Open the silicone cap of the ground coffee 

container (4) and position it on the plate (5).

•  Make sure that the rubber dispenser cone 

is centred in the hole of the container lid (4) 

as shown in Fig. D.

DESCRIPTION OF CONTROLS 

(Fig. E-F)

Grinding adjustment lever (8)

The appliance has a lever (8), which allows 

to adjust the level of grinding appropriate to 

your use:

FINE

Fine grinding

MEDIUM

Medium grinding

COARSE

Coarse grinding

Move the lever to make the indicator (12) 

correspond with the desired grinding level.

Description/Assembly/Commands