Кофемашина Philips HD8917 Saeco Incanto - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
The coffee grounds container was
placed back too fast.
Do not place back the coffee
grounds container until the screen
message prompts you to put it
back
The brew group cannot be
removed.
The brew group is not positioned
correctly.
Close the maintenance door.
Switch the machine off and back
on again. Wait for the machine
ready screen to appear and then
remove the brew group
The coffee grounds container is not
removed.
Remove the coffee grounds
container before removing the
brew group
The brew group cannot be
inserted.
The brew group is not in the correct
position.
The brew group was not put in rest
position before it was placed back.
Make sure that the lever is in
contact with the base of the brew
group and that the hook of the
brew group is in the correct
position.
Reset the machine by switching it
on and off. Place the drip tray and
the coffee grounds container back.
Leave the brew group out. Close
the maintenance door and switch
the machine on and off. Then try
to reinsert the brew group.
The machine is still in the descaling
procedure.
You cannot remove the brew
group when the descaling process
is active. First complete the
descaling process and then
remove the brew group.
The coffee has too little
cream or is watery.
The grinder is set to a coarse setting.
Adjust the grinder to a finer setting.
The coffee blend is not the correct
one.
Change the coffee blend.
The machine is performing its self-
adjustment.
Brew a few cups of coffee.
The brew group is dirty.
Clean the brew group.
Coffee is leaking from the
coffee dispensing spout
The coffee dispensing spout is
clogged.
Clean the coffee dispensing spout
and its holes using a pipe cleaner.
The coffee is not hot
enough.
The cups you use are cold.
Preheat the cups by rinsing them
with hot water.
The temperature is set too low.
Check the menu settings.
Set the temperature to high in the
menu.
You added milk.
Whether the milk you add is warm
or cold, it will always decrease the
temperature of the coffee to some
extent.
33
English
