Melitta Melitta Caffeo F 531-101 Passione Onetouch - Инструкция по эксплуатации - Страница 12

First steps

12

ENGLISH

3.3  Installing the appliance

Observe the following instructions:

ū Do not install the appliance in damp rooms.

ū Install the appliance on a stable, flat and dry surface. 

ū Do not install the appliance in the vicinity of sinks or the like.

ū Do not install the appliance on hot surfaces.

ū Install the appliance at a sufficient distance (approx. 10 cm) from the 

wall and other objects. The space above the appliance should be at least 
20 cm.

ū Route the power cable so it cannot be damaged by edges or hot sur-

faces.

3.4  Connecting the appliance

Observe the following instructions:

ū Check that the supply voltage matches the operating voltage specified 

in the technical data (see the  

Technical data

 on page 45 table).

ū Only connect the appliance to a properly installed earthing contact 

socket. If in doubt, consult a specialist electrician.

ū The protective contact socket must have a fuse of at least 10 A.

3.5  Switching on the appliance for the first time

During initial start-up, the language, the time and the water hardness can 
be set. The settings can be changed at a later point in time (see chapter  7 

Changing basic settings

 on page 30 and chapter  8.8 

Setting the water 

hardness

 on page 39).

Use the enclosed test strips to determine the water hardness. Observe the 
instructions on the test strip packaging and in Table 

Water hardness range

on page 45.

Information

ū We recommend pouring away the first two cups of coffee after initial 

start-up.

ū If you want to use a water filter, only insert this after starting up for the 

first time.