Melitta Caffeo F 830-102 Barista T Smart - Инструкция по эксплуатации - Страница 12

First steps

12

ENGLISH

3.3  Positioning the appliance

Observe the following instructions:

ū Do not position the appliance in damp rooms.

ū Position the appliance on a stable, flat and dry surface. 

ū Do not position the appliance in the vicinity of sinks or the like.

ū Do not position the appliance on hot surfaces.

ū Position the appliance a sufficient distance, approx. 10 cm, away from 

the wall and other objects. The space above the appliance should be at 
least 20 cm.

ū Route the power cable so that it cannot be damaged by edges or hot 

surfaces.

3.4  Connecting the appliance

Observe the following instructions:

ū Check that the supply voltage matches the operating voltage specified 

in the technical data (see table  

Technical data

 on page 47).

ū Only connect the appliance to a properly installed earthing contact 

socket. If in doubt, consult a specialist electrician.

ū The socket must be fused with at least a 10 A fuse.

3.5  Switching the appliance on for the first time

During initial starting up, you can set the language, the time and the water 
hardness. The settings can be changed at a later point in time (see chap-
ter  8 

Changing basic settings

 on page 32 and chapter  9.8 

Setting the 

water hardness

 on page 42).

Use the enclosed test strip to determine the water hardness. Observe the 
instructions on the test strip packaging and in table 

Water hardness range 

on page 47

.

Information

We recommend pouring away the first two cups of coffee after initially 
starting up.