La Pavoni LPSGEV03EU - Инструкция по эксплуатации - Страница 27

22

23

EN

coffee boiler (

29) is factory set to 92°C. 

To adjust the setting proceed as follows 

(Fig. 6):

•

press the 

button 

 as soon 

as “PRG” appears on the display, press 

the button 

 ;

•

when the temperature of the boiler 

appears on the display, press the 

 and 

 buttons to increase 

or decrease the temperature from a 

minimum of 80°C to a maximum of 

133°C.

•

3 seconds after having pressed the last 

button, the value is memorized and 

the display indicates the temperature.

The PID temperature controller for the 

service boiler (

30) is factory set to 122°C. 

To adjust the setting proceed as follows:

•

press the button 

 ; as soon as 

“PRG” appears on the display, press 

the button 

 ;

•

when the temperature of the boiler 

appears on the display, press the 

 and 

 buttons to increase 

or decrease the temperature from a 

minimum of 80°C to a maximum of 

133°C.

•

3 seconds after having pressed the last 

button, the value is memorized and 

the display indicates the temperature. 

•

The PID temperature controller 

has been factory set to the right 

temperature for making an 

excellent espresso.

•

If the temperature of the coffee 

boiler is set higher than 103°C, the 

display (

29

) will start to flash. This 

warns the user that the coffee will 

not be good if it is delivered at 

such a high temperature. 

5. USING THE MACHINE 

5–1. PREPARING AND DISPENSING 

COFFEE

Once you have carried out the 

operations described in section 4.1-4.2, 

the machine is ready for use.

Do not cover the cup-warming 

shelf with fabrics, felt etc.

•

Once switched on, the machine 

takes about 15 minutes to heat 

up. The outside temperature can 

affect heating times.

•

It is recommended that you 

place the filter holder in the 

group head before switching 

the machine on. This allows the 

filter holder to reach a perfect 

temperature.

To prepare coffee, proceed as follows: 

•

Place the required filter (

20-21-22-23) 

into the filter holder (

24-25-26).

•

Fill the filter with the required amount 

of coffee for 1 or 2 cups (7-8 g – 14-16 

g) according to the filter selected (

20-

21-22-23).

•

Level the coffee and compact it using 

the tamper (

18a-18b). Remove any 

coffee residues from the edge of the 

filter using the palm of your hand and 

insert the filter holder into the group 

head (

11), moving it towards the right 

to secure it.

•

Place the cups under the spouts and 

start to dispense coffee using the 

group head control lever (

15). The 

coffee is dispensed by moving the 

group head lever (

15) located on the 

control panel upwards. 

•

Once the required amount of coffee 

has been dispensed, move the group 

head lever (

15) down to stop delivery.

•

To dispense additional cups of coffee,