Кофемашина Siemens TK 54F09 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
17
Starting the service programme
● Switch the appliance to standby mode
using the
a
button.
● Hold down the coffee dispensing button
4
for at least 3 seconds.
D
lights up on the display.
● Empty and reinsert the trays
0
and
1
.
7
lights up on the display.
● Open the cover of the duct
14
for ground
coffee / cleaning tablets.
● Place
one cleaning tablet
in the duct
14
and close the cover.
9
lights up on the display and the
4
button flashes.
● Fill the water tank with lukewarm water,
add descaling agent and dissolve
completely (total liquid: 0.5 litres).
or
● Pour prepared descaling mixture into the
water tank (total liquid: 0.5 litres).
● Press the
4
button. The descaling
process begins. Duration approx. 10
minutes. The descaling solution flows into
the water tray
1
.
8
flashes on the display.
● Place a suitable container (approx. 0.5
litres) under the nozzle
9
.
● Set the dial
8
to
g
/
h
. The descaling
process begins. Duration approx. 5
minutes. The descaling solution flows into
the container.
D
lights up on the display.
● Empty and reinsert the water tray
1
.
9
lights up on the display and the
4
button flashes.
● Empty and clean the water tank
1
, fill
with fresh water up to the “max“ mark and
reinsert.
● Place a suitable container (approx. 0.5
litres) under the nozzle
9
.
● Press the
4
button. The cleaning process
begins. Water flows into the container.
8
lights up on the display.
● Turn the dial
8
to O. The cleaning process
begins. Duration approx. 10 minutes.
Liquid flows into tray
1
inside the
appliance, then from the coffee outlet.
D
lights up on the display.
● Empty, clean and reinsert the trays
0
and
1
.
The appliance heats up and is ready for use
again when all four buttons
4
,
5
,
a
and
h
light up and remain lit.
Important:
If the service programme is
interrupted, e.g. owing to a loss in power,
it is vital
that the water tank be emptied,
rinsed and filled with fresh water before
the appliance is used again. Then turn the
appliance on.
● The appliance rinses, liquid flows into
tray
1
.
8
flashes on the display.
● Hold a cup under the nozzle
9
and turn
the knob
8
to
g
/
h
.
Water runs into the cup.
8
lights up on the display.
● Turn the knob
8
back to O.
The appliance rinses and is ready for use
again.
en
