Siemens TE809201RW - Инструкция по эксплуатации - Страница 17

13

en

 Brightness

The display 

5

 brightness can be set from 

1

 to 

10

. 

●

Turn the rotary knob 

6

 to select the 

required setting.

 Water  hardness

●

Turn the rotary knob 

6

 to select the 

required water hardness 

1, 2, 3

 or 

4

.

Info: 

It is important to set the water hard-

ness correctly, so that the appliance indi-
cates accurately when the descaling pro-

gramme should be run. The factory setting 

for the water hardness is 

4

. 

You can check the water hardness using 
the enclosed test strip or by asking your 

local water supplier. 

● Dip the test strip briel y in water and 

check the result after one minute.

Level Water hardness

German (°dH) French (°fH)

1

2
3
4

1-7

8-14

15-21

22-30

1-13

14-25

26-38

39-54

 Water  filter

A new water i lter 

29

 must be rinsed before 

it can be used. 

● To do this, press the water i lter 

29

 i rmly 

into the water tank 

11

 with the aid of the 

measuring spoon 

14

. Fill the water tank 

with water up to the “

max

” mark. 

●

Turn the rotary knob 

6

 to select 

start

 and 

press the 

start

 button 

8

.

Place 1 l container under milk frother

Place suction pipe in container ▶ start

● Place a container with a capacity of 1 litre 

under the milk frother 

10

.

●

Place the end of the suction pipe 

10d

 in 

the container.

●

Press the 

start

 button 

8

. Water will now 

l ow through the i lter 

29

 to rinse it.

● Next, empty the container. 

The appliance is ready for use again. 

Info: 

Rinsing the i lter 

29

 simultaneously 

activates the setting for the “change i lter” 

display. 

You can i nd detailed information about the 

water i lter in the enclosed i lter instructions.

The i lter 

29

 is no longer effective when the 

Service - change filter

 display appears, or at 

the latest after two months. It needs to be 

replaced for reasons of hygiene and so that 
there is no build-up of limescale (this could 

damage the appliance).

Replacement i lters can be obtained from 

retailers (TZ70003) or from customer 

 service (575491).

If no new i lter 

29

 is used, turn the 

Water 

filter

 setting to 

no

.

Info: 

If the appliance has not been used 

for a prolonged period (for example, when 

you are on vacation), the existing i lter 

29

should be rinsed before the appliance is 

used again. To do this, simply dispense a 

cup of hot water.

TE809_1RW.indb   13

08.05.2013   14:32:35