Bosch TES 71525 RW - Инструкция по эксплуатации - Страница 18

14

Robert Bosch Hausgeräte GmbH

en

Water filter

A new water filter must be rinsed before it 

can be used. 

● To do this, press the water filter firmly 

into the water tank 

11

 with the aid of the 

measuring spoon 

14

. Fill the water tank 

with water up to the “

max

” mark. 

●

Turn the rotary knob 

6

 to select 

start

and press the 

start

 button 

8

.

Pl ace 1 l container 

Pl ace suction pipe in container 



start

●

Place a container with a capacity of 1 litre 

under the milk frother 

10

.

●

Place the end of the suction pipe 

10d

 in 

the container.

●

Press the 

start

 button 

8

. Water will now 

flow through the filter to rinse it.

● Next, empty the container. 

The appliance is ready for use again. 

Info: 

Rinsing the filter simultaneously 

activates the setting for the “change filter” 

display. 

You can find detailed information about the 

water filter in the enclosed filter instructions.

The filter is no longer effective when the 

Service - change filter

 display appears, or 

at the latest after two months. It needs to be 

replaced for reasons of hygiene and so that 

there is no build-up of limescale (this could 

damage the appliance).

Replacement filters can be obtained from 

retailers (TCZ7003) or from customer 

service (575491).

If no new filter is used, turn the 

Water  filter

 setting to 

no

.

Info: 

If the appliance has not been used for 

a prolonged period (for example, when you 

are on vacation), the existing filter should 

be rinsed before the appliance is used 

again. To do this, simply dispense a cup of 

hot water.

Transport. lock 

●

To avoid damage caused by frost during 

transport and storage, the appliance must 

be completely emptied first.

Info: 

The appliance must be ready for use 

and the water tank 

11

 filled.

●

Press the 

start

 button 

8

. The appliance 

automatically empties the pipe system 

and switches off.

●

Empty the water tank 

11

 and the drip 

tray 

23

.

Factory reset

You can cancel your own settings and reset 

the factory settings.

●

To activate the factory settings, press the 

start

 button 

8

.

Info:

 The appliance can also be reset to 

the factory settings using a combination of 

buttons. The appliance must be switched 

off fully.

●

Hold down the selection buttons 

<

 and 

>

4

 and the on/off switch 

1  O / I

 at the same 

time for at least 5 seconds. Press the 

start

 button 

8

. The factory settings are 

now reactivated.