Кофемашина Bosch TCA 5601 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
17
TCA56 06/2009
en
● Fill the cup approximately 1/3 full of milk.
● Press the
h
button. It will start to flash.
i
The appliance will heat up for approx. 20
seconds.
● Immerse the nozzle
9
deep into the milk,
but do not let it touch the bottom of the
cup.
● When the
h
button lights up and
8
appears on the display, turn the dial
8
to
g
/
h
.
!
Risk of scalding
When the dial
8
is set to
g
/
h
, the nozzle
9
may sputter. Escaping steam is very hot
and may cause liquids to sputter. Do not
touch the nozzle
9
or aim it at anyone.
● Rotate the cup slowly until the milk is fully
foamed.
● End the process by turning the dial
8
back to “
O
”.
Note:
When the nozzle
9
has cooled
down, clean it immediately. Dried residue is
difficult to remove.
Tip:
If possible, use cold lowfat (1.5% fat)
milk.
Steam for warming milk
!
Risk of burns
The nozzle gets very hot. Do not touch the
metal parts!
The appliance must be ready for use.
● Push the sleeve on the nozzle
9
all the
way
up
.
● Press the
h
button. It will start to flash.
i
The appliance will now heat up for
approx. 20 seconds.
● Immerse the nozzle
9
deep into the liquid
you want to heat.
● When the
h
button lights up and
8
appears on the display, turn dial
8
to
g
/
h
.
!
Risk of scalding
Risk of scalding
When the dial
8
is set to
g
/
h
, the nozzle
9
may sputter a little. Escaping steam is
very hot and may cause liquid to sputter.
Do not touch the nozzle
9
or aim it at
anyone.
● End the process by turning the dial
8
back to “
O
”.
Note:
When the nozzle
9
has cooled down,
clean immediately. Dried residue is difficult
to remove.
Maintenance and daily
cleaning
!
Risk of electric shock
Unplug the appliance before cleaning it.
Never immerse the appliance in water. Do
not use a steam cleaner.
● Wipe the outside of the appliance with a
damp cloth. Do not use scouring agents.
● Always remove any limescale,
coffee, milk or descaling fluid residue
immediately. Such residue can cause
corrosion.
● Wash all removable parts by hand only.
● Rinse out the water tank
1
with water
only.
● Remove, empty and clean the trays for
coffee grounds
0
and residual water
1
.
● Wipe out the inside of the appliance (tray
holders).
Note:
If the appliance is cold when switched
on, or if it is switched to “
eco
” mode after
dispensing coffee, it rinses automatically; in
other words the system cleans itself.
Nozzle 9 for hot water/steam
● Unscrew the nozzle
9
from the steam
pipe.
● Dismantle all parts
(Fig. E)
.
● Clean with a caustic cleaning solution and
a soft brush. Clean the tip of the nozzle
9c
with a blunt needle.
● Thoroughly rinse and dry all parts.
