REMEZair RMCH-403-01 - Инструкция по эксплуатации - Страница 10

ENG

The wide angle airflow ensures quick and even distribution of heat throughout the room.

4. Air heating

Two modes of air heating

By pressing the «Heat» button again, the heater 

operates at an maximum speed of 1500 W.

In Heating mode, you cannot use the Cooling or 
Humidifying function.

The modular filter system in the device allows you to easily and quickly replace filter 

modules and choose the mode of air purification you need.

5. Air purification

Module No.1 «Humidification/
Cooling and Aqua Filtration». In this 
mode, the device provides natural 

cooling and humidification of the air, 
and the aqua filtration process traps 
dust and household allergens.

Module No.2 «Composite HEPA + 
Carbon Filter». The three-stage 
filtration system in this mode allows 

deep purification of the air from the 
smallest particles of dust and other 

household allergens, and the carbon 
filter eliminates unpleasant odors.

Attention

When using the «Composite HEPA + Carbon Filter» module in the device, you cannot use 
the «Humidification and Cooling» mode. Water contact on the HEPA filter and the carbon 
filter has an extremely negative effect on their effectiveness.

Click the button «Purify»       to enable the ionization function. The corresponding indicator 
will light up on the display.

IonWind technology saturates the air with air ions, making it fresh and clean and 
significantly improves human well-being. The climatic complex generates 4800-5100 air 
ions per cm

3

, which corresponds to forest and sea air. This concentration of air ions is not 

contraindicated for people suffering from bronchial asthma. When the device is turned on, 

the ionisation function is automatically activated. 

6. Ionizer

Press the «Timer»       button, to turn on the timer. The timer is convenient to use for 

automatic shutdown of the Climate Station. The time selection range is 0-15 hours in 1 hour 

increments.

7. Timer

Click the «Swing»       button to change the angle of rotation of the ventilation grill slats 

by 80°. This function allows you to humidify, cool and heat the room more efficiently and 

evenly.

8. Rotating the slats

9. Wireless charging 

Wireless charging is located on the display of your device. Place a smartphone that 
supports wireless charging in the designated area and the smartphone will start charging.

10. Indication of lack of water in the tank

If there is no water in the tank of the climate complex, the sensor for lack of water light 
up, an audible signal will sound, and the water pump will stop working. To continue the 

humidification and cooling function, you need to add water to the tank.

The fan operates according to a specific pattern and can be set to low, medium and high 
speed. This mode simulates the effect of the sea breeze, making the air flow softer and 
more comfortable for users. The fan speed indicator displays the initial speed value. 
The number  below shows the operation of the unit in Breeze mode at high, medium and 
low speeds.

Breeze mode

The fan runs at first speed with the minimum noise level, the LED display is off.

Night mode

For maximum cooling, use the two ice boxes 

provided. 

1. Pour tap water into the ice packs and place 

them in the freezer of  a refrigerator until they 

freeze. 

2. Then place the ice packs in the water tank to 

keep the temperature below room temperature. 

3. Two ice packs ensure continuous use of the 

maximum cooling function.

ICE BOXES USE

To install modules No.1 and No.2 into the device, insert the corresponding filter in the 

plastic holder into the filter compartment, as shown in the figure.

Top

Top

Module No.1 Module No.2

Pressing the «Heat»       button once 
the heater operates at a average 
speed of 750 W.