Ducky (DKME2061ST) - Инструкция по эксплуатации - Страница 31

Recording steps:

RGB LED Zone Customization Modes

Note:

● 

When starting recording mode, Caps Lock will display the current LED Color.

● 

CM1

、

CM2 can work with other LED light modes at the same time.

CM1 and CM2 can be turned on along 

with other lighting modes. In addition, CM1 has the priority over CM2 when the zone overlaps. 
Press Fn + Alt + T for 3 seconds to turn off ALL backlit modes.

● 

If there is no activity in 30 seconds in the recording mode, the recording session will terminate 

without saving. 

●

 Caps Lock LED color follows the “100% Full Backlit mode” .

1. Press Fn + Alt + Caps Lock for 3 seconds, the buttons G (CM1) and B (CM2) will illuminate then press G to set 

CM1 and press B to set CM2.

2. When starting recording mode, Caps Lock will display the current LED color. The color can be adjusted by 

hitting Caps Lock + Z / X / C / V. After setting the desired color, hitting any key on the keyboard will set that key 
to the selected color.

3. Repeating the above steps allows the user to set different colors to different keys. If the key has been set, 

press again to cancel the setting.

4. To 

fi

nish recording, press Caps Lock + Left Shift (REC over) to 

fi

nish recording. The color of the Caps Lock key is 

the value you set.

● 

Adjust to the color 

fi

rst, then set the individual keys to be set to that color.

28