Laserliner DistanceCheck - Инструкция по эксплуатации - Страница 11

DistanceCheck

11

GB

•  Carpeting, upholstery or curtains will not reflect the laser optimally. 

Measure to flat surfaces.

•  Measurements made through glass (window panes) can falsify  

measurement results.

•  An energy-saving function switches the device off automatically.
•  Clean with a soft cloth. Water may not be allowed to penetrate the 

housing.

Technical Data

(Subject to technical changes without notice. 02.16)

Inside measurement range

0.05 m - 20 m

Precision (typical)*

± 2 mm / 10 m

Laser class 

2 < 1 mW

Laser wavelength

645-655 nm

Power supply

2 x AAA 1.5 Volt batteries

Dimensions (W x H x D)

118 x 37 x 26 mm

Weight (incl. batteries)

84 g

Automatic switch-off

30 sec laser / 3 min device

Operating temperature

-10°C – 40°C

Storage temperature

-20°C – 70°C

* measuring distance up to 10 m with strongly reflective target surface 
and at room temperature. The measurement deviation may increase by 
+/-0.2 mm/m for weakly reflective target surfaces.

EU directives and disposal

This device complies with all necessary standards  
for the free movement of goods within the EU.
This product is an electric device and must be  
collected separately for disposal according to  
the European Directive on waste electrical and  
electronic equipment.
Further safety and supplementary notices at:  

www.laserliner.com/info

Error codes:

Calculation error  
Received signal too weak 
Received signal too strong 
Measuring time too long

Ambient light level too high

Temperature is too high: > 40°C 
Temperature is too low: < 0°C

Hardware fault