Condtrol Neo X1-360 - Инструкция по эксплуатации - Страница 3

4

5

user manual

user manual

EN

EN

CONDTROL NEO X1-360/ X2-360

CONDTROL NEO X1-360/ X2-360

C ROS S 

L INE L A SER

C ROS S 

L INE L A SER

SAFE T Y IN S T RUC T I ON S 
Attention!

 This user manual is an essential part of this product.

The user manual should be read carefully before you use the product 

for the first time. If the product is given to someone for temporary 

use, be sure to enclose user manual to it.

- Do not misuse the product  

- Do not remove warning signs and protect them from abrasion, 

because they contain information about safe operation of the 

product. 

-Do not look into the laser beam or its reflection, with unprotected 

eye or through an optical instrument. Do not point the laser beam at 

people or animals without the need. You can dazzle them.

-To protect your eyes close them or look aside.

- Always install the product in such a way, so that laser line is below 

or above eye level.  

- Do not let unauthorized people enter the zone of product operation. 

- Store the product beyond reach of children and unauthorized 

people.  

- It is prohibited to disassemble or repair the product yourself. Entrust 

product repair to qualified personnel and use original spare parts 

only.

- Do not use the product in explosive environment, close to flammable 

materials.

- Laser intensive glasses are used for better recognition of the laser 

beam, do not use them for other purposes. Laser glasses do not 

protect from laser radiation as well as ultraviolet radiation and reduce 

color perception.

PRODUCT DESCRIPTION

Cross line laser NEO X1-360/X2-360 CONDTROL is intended to build 

and check vertical and horizontal planes and lines. The product is 

suitable for use at both indoor and outdoor building areas.
The product has 2 operating modes:
-  locked compensator, to build inclined planes and lines;
-  automatic leveling  to project horizontal and vertical planes 

and lines. Leveling function allows to automatically compensate 

irregularities within self-leveling range of ±4,5°. 

Pulse mode allows using laser receiver to increase working range 

of the instrument or to work when laser is hard to define in bright 

lighting conditions.

- Avoid heating the batteries to avoid the risk of explosion and 

electrolyte leakage. In case of liquid contact with skin, wash it 

immediately with soap and water. In case of contact with eyes, flush 

with clean water during 10 minutes and consult the doctor.