Condtrol Neo G 220 set - Инструкция по эксплуатации - Страница 3

4

5

user manual

C R O S S 

L I N E  L A S E R

EN

user manual

C R O S S 

L I N E  L A S E R

EN

CONDTROL NEO G220 Set

CONDTROL NEO G220 Set

S A F E T Y  I N S T R U C T I O N S 

Attention!

 This user manual is an essential par t of this product.

The user manual should be read carefully before you use the product 
for the first time. If the product is given to someone for temporar y 
use, be sure to enclose user manual to it.
- Do not misuse the product   
- Do not remove warning signs and protect them from abrasion, 
because they contain information about safe operation of the 
product. 

 
-Do not look into the laser beam or its reflection, with unprotected 
eye or through an optical instrument. Do not point the laser beam at 
people or animals without the need. You can dazzle them.
-To protect your eyes close them or look aside.
- Always install the product in such a way, so that laser line is below 
or above eye level.  
- Do not let unauthorized people enter the zone of product operation. 
- Store the product beyond reach of children and unauthorized 
people.  
- It is prohibited to disassemble or repair the product yourself. Entrust 
product repair to qualified personnel and use original spare par ts 
only.
- Do not use the product in explosive environment, close to flammable 
materials.
- Laser intensive glasses are used for better recognition of the laser 
beam, do not use them for other purposes. Laser glasses do not 
protect from laser radiation as well as ultraviolet radiation and reduce 
color perception.

PRODUCT DESCRIPTION

Cross line laser NEO G220 CONDTROL is intended to build and check 
ver tical and horizontal planes and lines, as well as up and down laser 
dots (zenith and nadir).

The product has 2 operating modes:

-  locked compensator, to build inclined planes and lines;

-  automatic levelling  to project horizontal and ver tical planes 
and lines. Levelling function allows to automatically compensate 
irregularities within self-levelling range of ±4,5°. 

Pulse mode allows using laser receiver to increase working range of 
the instrument or to work when laser is hard to be defined in bright 
lighting conditions.

- Avoid heating the batteries to avoid the risk of explosion and 
electroly te leakage. In case of liquid contact with skin, wash it 
immediately with soap and water. In case of contact with eyes, flush 
with clean water during 10 minutes and consult the doctor.

Laser radiation!
Do not stare into beam
Class 2 laser
<1 mW 630 -670nm
IEC 60825-1: 2007- 03

Laser radiation!
Do not stare into beam
Class 2 laser 
<1 mW 532nm
IEC 60825-1: 2007- 03