Condtrol MX2 SET - Инструкция по эксплуатации - Страница 13

24

25

24

25

User Manual

CROSS LINE 

LASER

User Manual

CROSS LINE 

LASER

CONDTROL MX2 / MX2 Set

CONDTROL MX2 / MX2 Set

MOUNTING OPTIONS

MAINTENANCE AND SERVICE  

Attention!

 The instrument is accurate optical mechanic device and requires 

careful handling. Check the accuracy before using. 
To increase the operating time and avoid the risk of unintentional blindness 
switch the laser on only when you are ready to measure. 
If operated near objects or air streams with dif ferent from the environment 
temperature  the  laser  line  may  tremble  due  to  heterogeneity  of  the 
atmosphere. The longer is the distance, the more trembling can be obser ved
The  width  of  the  laser  line  increases  with  the  increasing  of  the  operating 
distance.
To obtain the maximum accuracy use the middle of the laser line.

Maintenance  of  the  following  recommendations  will  ex tend  the  life  of  you 
device:

- Transpor t and carr y the device only with locked compensator.
-  Keep  the  device  clean  and  protected  from  any  bumps,  dust  and 
dampness;  do  not  allow  get ting  moisture,  dust  or  other  dir t  inside  of 
device. 
- In case if any moisture goes into device, remove the power supply from 
the device and take it to the ser vice center.
- Do not keep or use the device for a long time at high humidity conditions.
- Keep the instrument clean and wipe it with a clean and sof t cloth.

Mishandling  of  the  following  rules  can  be  cause  of  leaked  fluid  from  the 
power supply or other damages:

-  If you do not use the device for a long time remove the bat ter y from it. 
- Do not use dif ferent power supply types with dif ferent charge levels. 
- Do not leave the discharged power supply in the device.
- Do not use salt power supply.