ADA Cube 3-360 Professional Edition - Инструкция по эксплуатации - Страница 6

6

English

the vertical laser line on the wall and measure the distance 3m from point 

B to another point C. Point C must be on the vertical laser line, it means the 

height of C point is 3m. 

Measure the distance from point A to point C, if the distance is over 2 mm, 

please, contact with seller to calibrate the laser.

CARE AND CLEANING

Please handle measuring line laser with care. Clean with soft cloth only 

after any use. If necessary damp cloth with some water. If instrument is 

wet clean and dry it carefully. Pack it up only if it is perfectly dry. Transport 

in original container/case only.

Note:  During  transport  On/Off  compensator  lock  (5)  must  be  set  to  posi

-

tion “OFF”. Disregard may lead to damage of compensator.

SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS

• 

Measurements through glass or plastic windows;

• 

Dirty laser emitting window;

• 

After instrument has been dropped or hit. Please check the accuracy.

• 

La

rge  fluctuation  of  temperature:  if  instrument  will  be  used  in  cold 

areas after it has been stored in warm areas (or the other way round) 

please wait some minutes before carrying out measurements.

ELECTROMAGNETIC ACCEPTABILITY (EMC)

• 

It cannot be completely excluded that this instrument will disturb 

other instruments (e.g. navigation systems);

• 

will be disturbed by other instruments (e.g. intensive electromagnet-

ic radiation nearby industrial facilities or radio transmitters).

          LASER CLASS 2 WARNING LABELS ON THE LASER INSTRUMENT

LASER CLASSIFICATION

The line laser is a laser class 2 laser product accortding to DIN IEC 60825-

4