Russell Hobbs 24660-56 - Инструкция по эксплуатации - Страница 4

4

6.  Lower the motor unit on to the processing lid. You may have to turn it slightly, to engage 

the top of the blade unit.

7.  Put the plug into the power socket.

8.  Press the switch to start the motor, release it to switch off.

9.  It’s best to run the motor in bursts of a few seconds at a time, and inspect the results 

between bursts.

AFTER USE

1.  Unplug the appliance.

2.  Lift the motor unit off the bowl. Lift the processing lid off the bowl.

3.  Put a finger on top of the blade unit, to stop it falling out.

4.  Tip the processed contents out of the bowl.

5.  Alternatively, hold the plastic part of the blade unit, turn it to free it from the spindle 

flanges, and lift it straight up and out of the bowl.

6.  Fit the storage lid to the bowl.

CARE AND MAINTENANCE

1.  Unplug the appliance.

2.  Wipe the outside of the motor unit with a clean damp cloth.

3.  Clean the inside of the blade unit with a toothpick.

4.  Hand wash the removable parts.

` 

You may wash these parts in a dishwasher, but the harsh environment inside the 

dishwasher will affect the surface finishes. The damage should be cosmetic only, and should 

not affect the operation of the appliance.

RECYCLING

W

To avoid environmental and health problems due to hazardous substances, 

appliances and rechargeable and non-rechargeable batteries marked with 

one of these  symbols must not be disposed of with unsorted municipal 

waste. Always dispose of electrical and electronic products and, where 

applicable, rechargeable and non-rechargeable batteries, at an appropriate 

official recycling/collection point.

For recipes, please visit 

http://eu.russellhobbs.com/recipes/