Legrand NikyS 2к BA - Инструкция по эксплуатации - Страница 14

14

®

1 Introduction

This manual contains information for users of the Niky S 1-1.5-2-3 kVA models.

You are advised to read this handbook carefully before installing your uninterruptible power 

supply, meticulously following the instructions given herein.

The UPS Niky S is only been made for civil or industrial use; it is not in conformity with the standards 

for electro-medical equipment.

•  The UPS Niky S has been designed to supply data processing equipment. The load applied must 

not exceed the one indicated on the rear label of your UPS.

•  The ON/OFF button of your UPS does not electrically isolate the internal parts. To isolate your 

UPS unplug it from the mains power socket.

•  Do not open the UPS container since there may be parts inside with dangerously high voltage 

even when the mains plug is disconnected; there are no parts inside that the user can repair.

•  The UPS Niky S has been designed to work in closed, clean rooms where there are no inflamma-

ble liquids or corrosive substances and where it is not too damp.

•  Do not place near equipments that generate strong electro-magnetic fields and/or near equi-

pments that are sensible to electro-magnetic fields. (engines, floppy disks, speakers, adapters, 

monitors, video, etc...)

•  Do not pour any liquid on the UPS or inside the UPS.
•  Do not place the UPS in humid environment or near liquid, such as water, chemical solution…
•  Do not expose the UPS to the direct sunlight or any heat sorces.
•  Keep the ventilation slits clean to dissipate the heat of the UPS.
•  Use grounded power cable to connect the UPS to the mains supply.
•  Do not plug laser printers into the UPS because of their high start-up current.
•  Do not plug house electric equipments, such as hair dryer,air conditioner, and refrigerator into 

the UPS outlets.

2 Conditions of use

®