DIGITUS (DN-170063) - Инструкция по эксплуатации - Страница 2

Safety Warning 

-

The voltages inside UPS may be hazardous. Do not attempt to 
disassemble the unit. The unit contains no user serviceable parts. 
Only factory service personnel may perform repairs. 

-

Internal battery voltage is 12Vdc. sealed, lead-acid, 6 cells battery.   

-

Connection to any other type of receptacle other than a two-pole, 
three-wire grounded receptacle may result in shock hazard as well as 
violating to local electrical codes. 

-

In the event of an emergency, press the OFF button and disconnect the 
power cord from the AC power supply to properly disable the UPS. 

-

Do not allow liquids or any external objects to enter the UPS. Do not 
place beverages or any other liquid-containing vessels on or near the 
unit. 

-

This unit is designed for installation in a controlled environment 
(temperature controlled, indoor are free of conductive contaminants). 
Avoid installing the UPS in locations where there is static or flowing 
water, or excessive humidity. 

-

Do not plug the UPS input into its own output. 

-

Do not attach a power strip or surge suppressor to the UPS. 

-

Do not connect non-computer-related items, such as medical 
equipment, life-support equipment, microwave ovens, or vacuum 
cleaners to UPS. 

-

To reduce the risk of overheating the UPS, do not cover the UPS 
cooling vents and avoid exposing the unit to direct sunlight or installing 
the unit near heat emitting appliance such as air heaters or furnaces. 

-

Unplug the UPS prior to cleaning and do not use liquid or spray 
detergent. 

-

Do not dispose the batteries into fire as they may explode. 

-

Do not open or mutilate the battery or batteries. Released electrolyte 
is harmful to the skin and eyes. It may be toxic. 

-

A battery can present a risk of electrical shock and high short circuit 
current. The following precautions should be observed when working 
on batteries: 
1)

Remove watches, rings, or other metal objects from the hands. 

2)

Use tools with insulted handles. 

3)

Wear rubber gloves and boots. 

4)

Do not lay tools or metal parts on the top of batteries.