Источники бесперебойного питания APC 650 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Back-UPS Pro BR650MI / BR900MI / BR1300MI / BR1600MI
4
Operation
Power saving display
The display interface can be configured to be continuously illuminated, or to save
energy, it can be configured to darken after a period of inactivity.
1.
Full Time Mode: Press and hold DISPLAY for two seconds. The display will
illuminate and the Back-UPS will beep to confirm the Full Time mode.
2.
Power Saving Mode: Press and hold DISPLAY for two seconds. The display will
darken and the Back-UPS will beep to confirm the Power Saving mode. While in
Power Saving Mode, the display will illuminate if a button is pressed, it then
darkens after 60 seconds of no activity.
Unit sensitivity
Adjust the sensitivity of the Back-UPS to control when it will switch to battery power;
the higher the sensitivity, the more often the Back-UPS will switch to battery power.
1.
Ensure the Back-UPS is connected to AC power, but is OFF.
2.
Press and hold the P
OWER
button for six seconds. The
Load Capacity
bar will
flash on and off, indicating that the Back-UPS is in programming mode.
3.
Press P
OWER
again to rotate through the menu options. Stop at selected
sensitivity. The Back-UPS will beep to confirm the selection.
USB and Serial
Data port
To use PowerChute Personal Edition, connect the supplied USB cable or
an optional serial cable (not supplied).
Telephone Cable
Surge Protected
ports
Connect a telephone cable to the IN port, and connect a modem to the
OUT port.
AC Power Input
Use a power cable to connect the unit to AC power.
Battery Backup
outlets with Surge
Protection
During a power outage or other AC problems, the Battery Backup outlets
receive power for a limited time from the Back-UPS. Connect critical
equipment such as desktop computer, computer monitor, modem or other
data sensitive devices into these outlets.
Circuit Breaker
Use to reset the system after an overload condition has occurred causing
the circuit breaker to trip.
In/Out
Ethernet
surge-protected
ports
Use an Ethernet cable to connect a cable modem to the IN port, and
connect a computer to the port.
Surge Protected
outlets
These outlets provide full-time protection from surges, even if the
Back-UPS is off. Connect equipment such as printers and scanners that do
not require battery backup protection.
Generator Sensitivity
Default
Sensitive Loads
Low sensitivity
Medium sensitivity
(Default)
High sensitivity
156-300 Vac
176-294 Vac
176-288 Vac
Input voltage is extremely
low or high. (Not
recommended for
computer loads.)
The Back-UPS frequently
switches to battery power.
The connected equipment
is sensitive to voltage
fluctuations.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
