Источники бесперебойного питания APC 650 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.

Back-UPS Pro BR650MI / BR900MI / BR1300MI / BR1600MI
11
Battery Replacement
The battery typically lasts for 3 to 5 years, a shorter period if subjected to frequent
outages or elevated temperatures. Battery replacement parts for Back-UPS BR650MI is
APCRBC110
, for BR900MI is
APCRBC164
, for BR1300MI is
APCRBC165
, and for
BR1600MI is
APCRBC166
. Delaying the replacement of parts may corrode the
batteries in the cartridge. Recycle spent battery cartridges.
Warranty
The standard warranty is three (3) years from the date of purchase, valid in European
Community. For all other regions, the standard warranty is two (2) years from the date of
purchase. Schneider Electric IT (SEIT) standard procedure is to replace the original unit
with a factory reconditioned unit. Customers who must have the original unit back due to
the assignment of asset tags and set depreciation schedules must declare such a need at
first contact with an SEIT Technical Support representative. SEIT will ship the
replacement unit once the defective unit has been received by the repair department, or
cross-ship upon the receipt of a valid credit card number. The customer pays for shipping
the unit to SEIT. SEIT pays ground freight transportation costs to ship the replacement
unit to the customer.
CAUTION
RISK OF HYDROGEN SULPHIDE GAS AND EXCESSIVE SMOKE
•
Replace the battery at least every 5 years or at the end of its service life, whichever is earlier.
•
Replace the battery immediately when the UPS indicates battery replacement is necessary.
•
Replace batteries with the same number and type of batteries as originally installed in the
equipment.
•
Replace the battery immediately when the UPS indicates a battery over-temperature
condition, or when there is evidence of electrolyte leakage. Power off the UPS, unplug it from
the AC input, and disconnect the batteries. Do not operate the UPS until the batteries have
been replaced.
Failure to follow these instructions can result in minor or moderate injury and
equipment damage.
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)