SVEN GC-W400 - Инструкция по эксплуатации - Страница 19

ENG

19

GC-W400

Operation Manual

9. TROUBLESHOOTING

Problem

Solution

After installation of the software,

game controller does not work

normally.

А. Check whether the controller’s link cable is strongly

connected to PC.

B. Make sure that status indication for «Game 

Controller», after installation is «Confirm».

C. Check whether controller’s settings have no conflicts 

with other peripherals’ settings.

D. Restart your PC, if the controller still doesn’t work

normally.

Motors have no vibration

function in a racing game.

After exiting the game, disconnect the controller from 

the USB port and connect it again. If it still can’t work 

normally, please restart the computer.

After entering game, some

analog axis will automatically

operate.

The steering wheel hasn’t been calibrated or hasn’t been

confirmed after calibrations. Enter Option – Controllers –

Dead Zone to adjust the range of the dead zone, and 

make sure the axes are in the range of the dead zone. 

After entering the game,

vibration feedback operates

automatically.

Enter «Force Feedback» and calibrate it.

During the game vibration

feedback is insufficient.

Enter «Force Feedback» and set force of feedback.

If  none  of  the  above  mentioned  solutions  removes  the  problem,  please  refer  to  nearest 

authorized service center for consultation by qualified specialist. Never try to repair the device 

on your own.