SVEN GC-W300 - Инструкция по эксплуатации - Страница 8

ENG

8

Game Racing Wheel

11. SENSITIVITY ADJUSTMENT

Adjustment allows you to set three levels of steering wheel sensitivity:

• 

Press 9 + 10 key at the same time for 3 seconds, the green LED indicator will flash quickly.

• 

Press UP(

) n the D-pud, the LED turns off, the sensitivity is set to high.

• 

Press DOWN ( ) button to set the low sensitivity, the LED turns off - the low sensitivity is set. 

• 

Press  left  or  right  on  the  D-pad,  to  set  the  average  sensitivity,  the  LED  will  turn  off,  and  the 

average sensitivity is set.

The steering sensitivity setting retains its properties until the steering wheel is disconnected 
from the PC. When you reconnect the rudder, the sensitivity value is set to default.

12. TROUBLESHOOTING

Problem

Solution

OS Windows does not detect 

the steering wheel.

•

 Check if the pointing device is properly connected to the 

USB port of the PC. Connect device to a different USB port.

• Do not use USB hubs and extension cords, connect the 

steering wheel directly to the USB port of your PC. 

• The manipulator may be in conflict with other peripheral 

devices.

• Restart your PC.

Vibration feedback does not 

work during the game.

• Go to the game settings, turn on the mode of operation of 

the steering wheel with vibration feedback.

• Disconnect the pointing device from the PC, restart and 

reconnect the pointing device.

During the game, the vibration 

feedback function is 

insufficient.

• 

Check vibration feedback in the software settings for the 

manipulator «Vibration Test». Adjust the force of vibration

If  none  of  the  above  mentioned  solutions  removes  the  problem,  please  refer  to  nearest 

authorized service center for consultation by qualified specialist. Never try to repair the device 

on your own.