Sony PS2(slim)Pink+Shrek 2 - Инструкция по эксплуатации - Страница 30

30

Adjusting DVD player settings

DNR (Digital Noise Reduction)

You can use this setting to help reduce roughness in the on-screen image 
and produce a cleaner picture.

Notes

• "DNR2" is more effective for reducing image roughness than "DNR1", but in some 

cases an afterimage may appear. If this occurs, select "Off".

• The DNR function may produce limited results on some DVDs.

• When you set "Progressive" to "On", "DNR" is automatically turned off and cannot 

be turned on.

Outline Sharpening

You can sharpen or soften the outline of the on-screen image. The higher 
the value, the sharper the outline. Normally, select "0".

Note

Depending on the DVD, Outline Sharpening may produce limited results.

Display

During playback, you can display playback status information in the top 
right corner of the screen for a few seconds.

Progressive

You can display an image in which the picture updates all the lines in one 
pass. In most cases, this results in a clearer, flicker-free image. This feature 
is available only if your TV and AV Cable* support progressive scan 
(480p).

* The Component AV Cable (for PlayStation

®

2) (sold separately) is compatible 

with progressive scan.

* The DVD player's progressive scan mode is only available when playing a disc 

recorded in NTSC format, and viewed on a TV that supports progressive scan 
(480p).

Notes

• If picture quality is reduced or no image is displayed, set "Progressive" to "Off" 

when the console is connected to a TV without the necessary equipment. If you 
accidentally set this option to "On" for such a TV, picture quality may be reduced 
or the picture may not be displayed. To clear the setting, follow these steps:

• DVDs can contain video-based and film-based material, which use different frame 

rates. When playing video-based material using progressive scan, some images 
may appear unnatural. If this occurs, set "Progressive" to "Off" and view in 
standard interlace mode.

• When you set "Progressive" to "On", "TV Type" (

page 29) is automatically set 

to "16:9".

Off

DNR is not used.

DNR1

Increases picture quality

DNR2

Increases picture quality (maximum)

• -2

• -1

• 0

• +1

• +2

On

Playback status information is displayed for a few seconds.

Off

Playback status information is not displayed.

On

Select this option when the console is connected to a TV that supports 
progressive scan (480p).*

Off

Select this option when the console is connected to a standard TV.

1

Check that you have a DVD in the console.

2

Press the 

\

/

1

 (on/standby)/RESET button on the console front.

Then press and hold down the START button of the Analog Controller 
(DUALSHOCK

®

2) in controller port 1 until the DVD picture is displayed. 

The "Progressive" setting is returned to "Off", allowing the DVD-Video to 
be displayed as normal. You can also cancel this setting using the "Clear 
Progressive Setting" (

page 40) option in the Version Information 

screen.