Smeg FL130P - Инструкция по эксплуатации - Страница 2

Instructions for Use

12

• 

Use higher thermostat settings only when required or

recommended.

• 

Before loading the appliance with packages of fresh foods,

make sure they are cooled to ambient temperature.

• 

Ice and frost layer increase energy consumption, so do

clean the appliance as soon as the layer is 3-5 mm thick.

• 

If the gasket is damaged or if it turns out that the sealing is

poor, the energy consumption is substantially higher. To

restore efficiency, replace the gasket.

• 

Condenser at the bottom of the appliance must always be
clean and dust free (see Section 

Cleaning of the

Appliance

).

• 

Always consider instructions stated in sections Positioning

and Energy Saving Tips, otherwise the energy consumption

is substantially higher.

 Important

• 

If you have bought this appliance to replace an old one

equipped with a lock that cannot be opened from inside

(lock, bolt), make sure that the lock is broken. This will make

it impossible for children to lock themselves inside the

appliance and suffocate.

• 

The appliance must be correctly connected to the mains

supply. (see: Connecting to the Mains Supply).

• 

Do not touch the cooled surfaces while the appliance

operates, especially not with wet hands, because the skin

may stick to the cold surfaces.

• 

Do not freeze bottles containing liquid, especially not soft

drinks, such as mineral water, sparkling wine, beer, cola

etc., because liquid expands during freezing and the glass

bottle is very likely to blow up.

• 

Do not eat frozen food (bread, fruit, vegetables), because

you can get frostbites.

• 

If the food has strange smell or color, throw it away, because

it is very likely that it is spoiled and therefore dangerous to

eat.

• 

Disconnect the appliance from the power supply before

repairing it (only a qualified technician should repair it),

before cleaning and before replacing the light bulb.

• 

Do not defrost the appliance with other electric appliances

(as for example with hair dryer) and never scrape the frost

layer with sharp objects. Use only enclosed tools or tools

recommended by the manufacturer.

• 

For the sake of environment protection - be careful not to

damage the rear wall  of the appliance (the condenser unit or

the tubes - for example when moving the appliance) or any

part of the refrigerating system inside the appliance.

• 

The refrigerating system of the appliance is filled with

refrigerant and oil, so when the appliance is damaged,

handle it with care and dispose it of in compliance with

environmental protecting precautions. (See We Care for the

Environment).

• 

In the supply cord is damaged, it must be replaced by the

manufacturer or his service agent or a qualified person in

order to avoid hazard.

• 

The rating plate is inside the appliance or outside on the rear

wall.

The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the recycling

of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of thisproduct. For more
detailed information about recycling of this product,
please contact your local city office, your household
waste disposal service or the shop where you purchased
the product

.

Disposing of the Worn Out Appliance

• 

When your appliance finally wears out, dispose it of. If the

appliance has a lock, break it, in order to prevent eventual

accidents (danger of children get locked inside the

appliance).

• 

The refrigerating system of the appliance is filled with

refrigerant and insulating substances which should be

separately treated and processed. Call your nearest

authorised service agent or specialised servicing centre. If

you don't find one, contact your local authorities or your

distributor. Be careful not to damage the tubes on the rear

wall of the appliance (danger of pollution).

• 

To avoid pollution of the environment make sure not to

damage the hose at the bottom of the appliance.

Placing and Installation

Choosing the Right Place

Place the appliance in dry and regularly ventilated room.

Allowed ambient temperature depends on the model (class) of

the appliance and is stated on the rating plate of the appliance.

Never place the appliance near heat emitting devices (e.g.

cooker, radiator, water heater or similar devices) and do not

expose it to direct sunlight.

The appliance should be positioned at least 3 cm away from

the electric or gas cooker and at least 30 cm away from the oil

or coal stove. If this is not possible, use an appropriate

insulation.

Class

Ambient temparature

SN (sub-normal)

from + 10°C to + 32°C

N (normal)

from + 16°C to + 32°C

Connection to Power Supply

Connect the appliance with the cable and plug to the power

supply socket outlet with a ground terminal (safety socket).

Required nominal voltage and frequency are indicated on the

rating plate. The connection to the mains supply and earthing

have to be made according to current standards and

regulations. The appliance resists temporary voltage tolerance

up to -6 to +6 %.

Adjusting the height of the appliance

The appliance is equipped with four adjustable legs, so that the

height may be adjusted from 82 to 90 cm. The height must be

adjusted prior building the appliance into the opening slot, and

it should be set at such height that the top panel of the
appliance fits exactly below the kitchen worktop (see 

Mounting

Instructions

).