Smeg FAB28LBL1 - Инструкция по эксплуатации - Страница 14

Instructions for the user

32

PROBLEM

POSSIBLE CAUSE

PROBABLE SOLUTION 

Too much ice forming on back wall  of
refrigerator section (layer of frost
more than 1 cm thick):

- Cooling temperature regulator

device set too high (meaning
lower temperature inside the
appliance);

-  door opened often or for long

periods;

-  Turn the regulator to a lower

setting (1-2) to increase the
temperature inside the appliance
slightly;

- check that the gaskets are

providing an airtight seal;

-  open the door less often and for

shorter times;

-  rise in atmospheric temperature

and humidity;

-  do not place hot food or drinks

inside the refrigerator;

Too much ice forming in freezer 

- 

inside temperature setting
thermostat set on too low a
temperature;

-  Turn the regulator to a lower

setting (1-2) to increase the
temperature inside the appliance
slightly;

- check that the gaskets are

providing an airtight seal: If they
are cracked, try to soften the
gasket by pulling it with one hand
and sliding your closed fingers
along the inside;

-  open the door less often and for

shorter times;

-  rise in atmospheric temperature

and humidity;

-  do not place hot food or drinks

inside the freezer;

Front of cabinet hot to the touch

- 

- the refrigerator is operating

normally.  Inside the cabinet there
is a surface cooling system
designed to restrict the formation
of condensation in the area where
the door gasket closes.