SIEMENS KG56NHI20R - Инструкция по эксплуатации - Страница 18

en

18

Deactivating the cameras:
1. Press super button and lock/alarm 

off button simultaneously to open the 

Home Connect menu. 
The display shows 

Cn

.

Note

Press both buttons at exactly the 

same time.Button operation is locked 

if only the lock/alarm off button is 

pressed for a longer period. Press 

lock/alarm off button again until the 

lock is deactivated.

2. Press °C button repeatedly until the 

displays 

Ca

 and 

oF

 are shown.

3. Press+ button to deactivate the 

cameras.
The display shows 

oF

, the cameras 

are deactivated.

Resetting Home Connect settings

If the connection process does not work 

or you would like to log the refrigerator 

on to a different home network (WLAN), 

you can reset the Home Connect 

settings:
1. Press the super button and the lock/

alarm off button simultaneously to 

open the Home Connect menu. 
The display shows 

Cn

.

Note

Press both buttons at exactly the 

same time.Button operation is locked 

if only the lock/alarm off button is 

pressed for a longer period. Press the 

lock/alarm off button again until the 

lock is deactivated.

2. Press the °C button repeatedly until 

the displays 

rE

 and 

oF

 are shown.

3. Press the + button.

■

The display shows a short 

animation and then again 

oF

.

The Home Connect settings have 

been reset.

■

If the display shows 

Er

, start the 

reset again or call customer 

service.

Customer Service access

If you contact Customer Service, they 

can access your appliance and view its 

status after you have given your consent. 

You need to have your appliance 

connected to your home network for this.
Further information about Customer 

Service access and its availability in your 

country is available under www.home-

connect.com in the Help & Support area.
1. Contact Customer Service.
2. Confirm the start of Customer Service 

access in the app.
During Customer Service access the 

symbol CS appears on the control 

panel.

3. As soon as Customer Service has 

obtained the necessary data, they end 

access.

Note

You can interrupt remote diagnosis 

early by switching off Customer 

Service access in the Home Connect 

app.