Schaub Lorenz SLUS435X3E - Инструкция по эксплуатации - Страница 23

EN -22-

ERROR TYPE

ERROR TYPE

WHY

WHAT TO DO

SR – Set value 

Blink on cooler 

set value screen

"Refrigerator 

comp.  

Not Cold enough"

Ideal temperature for 

Ref. Compartment is +4 

o

C. If you see this warn-

ing your foods have risk 

of spoiling.

1. Set the refrigerator tem-

perature to colder values or 

set the super cooling mode 

until the compartment gets to 

normal temperature.
2. Do not open the door 

much until this failure is off.

SR – Set value 

blink on freezer 

and cooler set 

value screen

"not cold enough 

Warning"

IT IS COMBINATION 

OF "NOT COOL 

ENOUGH" ERROR 

FOR BOTH OF THE 

COMPARTMENTS.

You will see this failure when 

first starting the appliance. It 

will be off after the compart-

ments gets normal tempera-

ture

SR – Set value 

blink on cooler 

set value screen

Refrigerator comp. 

too Cold

The foods starts to 

freeze because of the 

too much cold tempera-

ture

1. Check if the “Super cooling 

mode” is on
2.  Decrease the refrigerator 

temperature values

“--”

"Low voltage 

Warning"

When the power supply 

gets lower than 170 V 

the appliance gets to 

steady position.

This is not a failure. This 

prevents any damages on 

the compressor. This warning 

will off after the voltage gets 

required level

What to do if your refrigerator does not operate; 
Check that;

•  There is no power ,
•  The general switch in your home is disconnected ,
•  The thermostat setting is on “1” position ,
• 

The socket is not sufficient. To check this, plug in another appliance that you know which 

is working into the same socket.

What to do if your refrigerator performs poorly;
Check that;

•  You have not overloaded the appliance ,
•  The doors are closed perfectly ,
•  There is no dust on the condenser ,
•  There is enough place at the rear and side walls.

If your fridge is operating too loudly;
Normal Noises

Cracking (Ice cracking) noise:

•  During automatic defrosting.
• 

When the appliance is cooled or warmed (due to expansion of appliance material).

Click noise: 

Heard when the thermostat switches the compressor on/off.