Schaub Lorenz SLUS256W3M - Инструкция по эксплуатации - Страница 22

Холодильник Schaub Lorenz SLUS256W3M - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 32
Загружаем инструкцию
background image

EN - 20 -

Installing  and  operating  your  fridge

Before  starting  to  use  your  fridge,  you  should  pay  attention  to  the  following  points:

•  The  operating  voltage for  your fridge  is 220-240  V at  50Hz.

•  W e  do  not  accept  responsibility  for  any  damages  that  occur  due  to

ung rounded  usage.

•  Place  your  fridge  where  it  will  not  be  exposed  to  direct  sunlight.

•  Your  appliance  should  be  at  least  50  cm  away  from  stoves,  gas

ovens  and  heater  cores,  and  at  least  5  cm  away  from  electrical
ovens.

•  Your  fridge  should  never  be  used  outdoors  or  exposed  to  rain.

•  W hen  your  fridge  is  placed  next to  a  deep  freezer,  there  should  be

at  least  2  cm  between  them  to  prevent  humidity  forming  on  the  outer  surface.

•  Do  not  place  anything  on  your  fridge,  and  install  your  fridge  in  a  suitable  place  so

that  at  least  15  cm  of  free  space  is  available  above  it.

•  Use  the  adj ustable  front  legs  to  make  sure  your  appliance  is  level  and  stable.  You

can  adjust  the  legs  by  turning  them  in  either  direction.  This  should  be  done  before
placing  food  in  the  fridge.

  •  Before  using  your  fridge,  wipe  all  parts  with  a  solution  of  warm  water  and  a

teaspoon  of  sodium  bicarbonate,  then  rinse  with  clean  water  and
dry.
Place  all  parts  in  the  fridge  after  cleaning.

•  Install  the  plastic  distance  guide  (the  part  with  black  vanes  at  the

rear)  by  turning  it  90°  (as  shown  in  the  figure)  to  prevent  the
condenser  from  touching  the  wall.

•  The  refrigerator  should  be  placed  against  a  wall  with  a  free  space

not  exceeding  75  mm.

Before  Using  your  Fridge

•  W hen  using  your  fridge  for  the  first  time,  or  after  transportation,

keep  it  in  an  upright  position  for  at  least  3  hours  before  plugging
into  the  mains.  This  allows  efficient  operation  and  prevents
damage  to  the  compressor.

•  Your  fridge  may  have  a  smell  when  it  is  operated  for  the  first  time.

This  is  normal  and  the  smell  will  fade  away  when  your  fridge
starts  to  cool.

•  Do  not  touch  frozen  goods  with  wet  hands.  Do  not  eat  ice-cream  or  ice

cubes  immediately  after  you  have  taken  them  out  of  the  ice-making
co mpartmen t.

•  Do  not  re-freeze  frozen  goods  after  they  have  melted.  This  may  cause  health

issues  such  as  food  poisoning.

•  Do not  cover the  body  or top  of  fridge with  lace. This  affects  the performance  of

your  fridge.

•  Secure  any  accessories  in  the  fridge  during  transportation  to  prevent  damage

to  the  accessories.

Полезные видео

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Schaub Lorenz SLUS256W3M?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"