Schaub Lorenz SLF E225WE - Инструкция по эксплуатации - Страница 28

EN 

27

BEFORE USING THE APPLIANCE

•  Never  touch  the  power  cord/plug  with  wet  hands  as  this  could 

cause a short circuit or electric shock.

• 

Do not place glass bottles or beverage cans in the ice-making 

compartment as they can burst as the contents freeze.

•  Do  not  place  explosive  or  flammable  material  in  your  freezer. 

Place drinks with high alcohol content vertically in the frezer 

compartment and make sure that their tops are tightly closed.

• 

When removing ice from the ice-making compartment, do not 

touch it. Ice may cause frost burns and/or cuts.

• 

Do not touch frozen goods with wet hands! Do not eat ice-cream 

and ice cubes immediately after you have taken them out of the 

freezer!

• 

Do not touch frozen goods with wet hands. Do not eat ice-cream 

or ice cubes immediately after you have taken them out of the 

ice-making compartment.

•  Do not cover the body or top of freezer with lace. This affects the 

performance of your freezer.

• 

Secure any accessories in the freezer during transportation to 

prevent damage to the accessories.

• 

Do not use plug adapter

Installing and operating your freezer

Before starting to use your freezer, you should pay attention to the 

following points:

• 

The operating voltage for your freezer is 220-240 V at 50Hz.

• 

The plug must be accessible after installation.

•  Your  freezer  may  have  a  smell  when  it  is  operated  for  the  first 

time. This is normal and the smell will fade away when your 

freezer starts to cool. 

• 

Before connecting your freezer, ensure that the information on 

the data plate (voltage and connected load) matches that of the 

mains electricity supply. If in doubt, consult a qualified electrician.

•  Insert the plug into a socket with an efficient ground connection. If 

the socket has no ground contact or the plug does not match, we 

recommend that you consult a qualified electrician for assistance.

• 

The appliance must be connected with a properly installed fused 

socket. Power supply (AC) and voltage at the operating point 

must match with the details on the name plate of the appliance 

(name plate is located on the inside left of the appliance).

• 

We do not accept responsibility for any damages that occur due 

to ungrounded usage.

•  Place your freezer where it will not be exposed to direct sunlight.