Liebherr IKBP 3560 Premium BioFresh - Инструкция по эксплуатации - Страница 11

*

u

Clean drain hole: Remove deposits

with  a  narrow  instrument,  e.g.  a

cotton bud.

*

u

Most  of  the  parts  can  be  dismantled  for  cleaning:  see  the

relevant chapter.

u

Clean  drawers  by  hand  with  lukewarm  water  and  a  little

washing up liquid.

u

All the other fittings can be put in the dishwasher.

u

Only  use  a  damp  cloth  to  clean  the  telescopic  rails.  The

grease  in  the  runners  is  for  lubrication  purposes  and  must

not be removed.

After cleaning:

u

Wipe dry the appliance and items of equipment.

u

Connect the appliance and switch it on again.

u

Put the food back inside.

6.3  Customer service

First  check  whether  you  can  correct  the  fault  yourself  by  refer-

ence to the list (see Malfunction). If this is not the case, please

contact  the  customer  service  whose  address  is  given  in  the

enclosed customer service list.

WARNING

Risk of injury if repair work is not carried out professionally!

u

Have  any  repairs  and  action  -  not  expressly  specified  -  on

the  appliance  and  mains  cable  carried  out  by  service

personnel only. (see Maintenance)

u

Read  the  appliance

designation

Fig.  18  (1),  service

No.

  Fig.  18  (2)  and

serial  No.

  Fig.  18  (3)

off  the  type  plate

located  inside  the

appliance  on  the  left-

hand side.

Fig. 18 

u

Notify  the  customer  service,  specifying  the  fault,  appliance

designation

 Fig. 18 (1), service No. Fig. 18 (2) and serial No.

Fig. 18 (3).

w

This will help us to provide you with a faster and more accu-

rate service.

u

Keep  the  appliance  closed  until  the  customer  service

arrives.

w

The food will stay cool longer.

u

Pull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

7  Malfunctions

Your  appliance  is  designed  and  manufactured  for  a  long  life

span  and  reliable  operation.  If  a  malfunction  nonetheless

occurs  during  operation,  check  whether  it  is  due  to  a  handling

error.  In  this  case  you  will  have  to  be  charged  for  the  costs

incurred,  even  during  the  warranty  period.  You  may  be  able  to

rectify the following faults yourself:

Appliance does not work.

→

The appliance is not switched on.

u

Switch on the appliance.

→

The power plug is not properly inserted in the wall socket.

u

Check power plug.

→

The fuse of the wall socket is not in order.

u

Check fuse.

The compressor runs for a long time.

→

The compressor switches to a low speed when little cold is

needed. Although the running time is increased as a result,

energy is saved.

u

This is normal in energy-saving models.

→

SuperCool is activated.

u

The  compressor  runs  for  longer  in  order  to  rapidly  cool  the

food. This is normal.

A LED on the bottom rear of the appliance (at the

compressor) flashes repeatedly every 5 seconds*.

→

There is a fault.

u

Please contact the after-sales service (see Maintenance).

Excessive noise.

→

Due to the various speed steps, speed-regulated* compres-

sors can generate different running noises.

u

The sound is normal.

A bubbling and gurgling noise.

→

This noise comes from the refrigerant flowing in the refriger-

ation circuit.

u

The sound is normal.

A quiet clicking noise.

→

The  noise  is  produced  whenever  the  refrigeration  unit

(motor) automatically switches on or off.

u

The sound is normal.

A hum. It is briefly a little louder when the refrigeration

unit (the motor) switches on.

→

The  refrigeration  increases  automatically  when  the

SuperCool  function  is  activated,  fresh  food  has  just  been

placed in the appliance or the door has been left open for a

while.

u

The sound is normal.

→

The ambient temperature is too high.

u

Solution: (see 1.2)

A low hum.

→

The sound is produced by air flow noise of the fan.

u

The sound is normal.

Vibration noises

→

The appliance is not standing firmly on the floor. As a result

objects and adjacent units start to vibrate when the refriger-

ator is running.

u

Check the installation and realign the appliance.

u

Keep bottles and jars apart.

Flow sound at the soft stop mechanism.

→

The  noise  is  produced  when  the  door  is  opened  and

closed.

u

The sound is normal.

The temperature display indicates: 

F0

 to 

F9

→

There is a fault.

u

Please contact the after-sales service (see Maintenance).

DEMO shines in the temperature display.

→

The demo mode is activated.

u

Please contact the after-sales service (see Maintenance).

The outer surfaces of the appliance are warm*.

→

The  heat  of  the  refrigeration  circuit  is  used  to  prevent

condensate from forming.

u

This is normal.

Malfunctions

* Depending on model and options

11