Liebherr GN 3613 Comfort NoFrost - Инструкция по эксплуатации - Страница 8

5.11 Cold storage accumulators

The  cold  storage  accumulators  prevent  the  temperature  from

rising too fast in the event of power failure.

5.11.1 Using cold storage accumulators

u

Place  the  cold  storage  accu-

mulators  in  the  top  freezer

compartment to save space.

u

Place  the  frozen  cold  storage

accumulators  on  the  frozen

food in the upper front area of

the freezer compartment.

6 Maintenance

6.1 Defrosting with NoFrost

The NoFrost system automatically defrosts the appliance.
The  moisture  condenses  on  the  evaporator,  is  periodically

defrosted and evaporates.

u

The appliance does not have to be manually defrosted.

6.2 Cleaning the appliance

Before cleaning:

CAUTION

Risk of injury and damage as a result of hot steam!

Hot steam may damage the surfaces and cause burns.

u

Do not use any steam cleaners!

NOTICE

Incorrect cleaning damages the appliance!

u

Do not use cleaning agents in concentrated form.

u

Do not use any scouring or abrasive sponges or steel wool.

u

Do  not  use  any  cleaning  agents  containing  sand,  chloride,

chemicals or acid.

u

Do not use chemical solvents.

u

Do not damage or remove the type plate on the inside of the

appliance. It is important for the customer service.

u

Do not pull off, bend or damage cables or other components.

u

Do  not  allow  any  cleaning  water  to  enter  the  drain  channel,

ventilation grille or electrical parts.

u

Empty the appliance.

u

Pull out the plug.

- Use  soft  cleaning  cloths  and  a  multi-purpose

cleaning agent with neutral pH value.

- Only use food compatible cleaning and care agents

on the inside of the appliance.

Outside surfaces and interior:

u

Regularly clean ventilation grilles.

w

Dust deposits increase energy consumption.

u

Clean the plastic surfaces, outside and inside, by hand using

lukewarm water and a little washing-up liquid.

Items of equipment:

u

Clean items of equipment by hand with lukewarm water and

a little washing-up liquid.

After cleaning:

u

Wipe dry the appliance and items of equipment.

u

Connect the appliance and switch it on again.

u

Switch on SuperFrost (see 5.6) .

When the temperature is sufficiently cold:

u

Put the food back inside.

6.3 Changing the interior light

Bulb data

max. 15 W

Fitting: E14

The type of current and voltage must conform with the details

on the type plate.

u

Switch off the appliance.

u

Pull  out  the  power  plug  or

switch off the fuse.

u

Change  the  bulb  under  the

operating panel as illustrated.

6.4 Customer service

First  check  whether  you  can  correct  the  fault  yourself  by  refer-

ence to the list  (see Malfunction). If this is not the case, please

contact  the  customer  service  whose  address  is  given  in  the

enclosed customer service list.

WARNING

Risk of injury if repair work is not carried out professionally!

u

Have  any  repairs  to  and  intervention  in  the  appliance  and

mains power cable, which are not expressly mentioned in the

(see Maintenance) carried out by the customer service only.

u

Read  the  appliance

designation

Fig.  10  (1),  service

No.

  Fig.  10  (2)  and

serial No.

 Fig. 10 (3) off

the  type  plate  located

inside  the  appliance

on the left-hand side.

Fig. 10 

u

Notify  the  customer  service,  specifying  the  fault,  appliance

designation

 Fig. 10 (1), service No. Fig. 10 (2) and serial No.

Fig. 10 (3).

w

This will help us to provide you with a faster and more accurate

service.

u

Keep the appliance closed until the customer service arrives.

w

The food will stay cool longer.

u

Pull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

7 Malfunction

Your appliance is designed and manufactured for a long life span

and  reliable  operation.  If  a  malfunction  nonetheless  occurs

during operation, check whether it is due to a handling error. In

this case you will have to be charged for the costs incurred, even

during  the  warranty  period.  You  may  be  able  to  rectify  the

following faults yourself:
Appliance does not work.

→

The appliance is not switched on.

u

Switch on the appliance.

→

The power plug is not properly inserted in the wall socket.

u

Check power plug.

→

The fuse of the wall socket is not in order.

Maintenance

8