Liebherr CN 5156 Premium NoFrost - Инструкция по эксплуатации - Страница 4

12

Brightness of the temperature display

You can adjust the brightness of the temperature display to the light 

conditions of the room in which the appliance is installed.

Adjusting the brightness

The  brightness  is  adjustable  between 

0

  (no  illumination)  and 

5

 (maximum brightness).

•  To activate the set-up mode: press 

the SuperFrost button 

4

 for about 

5 seconds.

•  The display indicates  .

•  The 

MENU

 symbol lights up.

•  Using the Up button 

bm

 or Down 

button 

9

select  .

•  Briefly press the SuperFrost button 

4

.

•  To make the display brighter: press 

Up button 

bm

.

•  To make the display darker: press 

Down button 

9

.

•  Press the SuperFrost button 

4

.

•  The brightness is adjusted to the 

new value.

•  To deactivate the set-up mode: press the freezer compartment 

On/Off button 

6

 or wait for 5 minutes.

Audible warning signal

The appliance is equipped with an alarm func-

tion.

Audible door alarm

If an appliance door is left open for more than 

60 seconds,  the  audible  warning  signal  will 

sound. Press the audible warning on/off button 

8

 to cancel the alarm. The alarm switches back 

to standby when the door is shut.

Audible/visual temperature alarm

If the temperature in the freezer compartment 

rises too high, the audible warning signal will 

sound and the alarm symbol 

2

 and the tem-

perature display will flash. 
Press  the  audible  warning  on/off  button 

8

to cancel the alarm. The symbol 

2

 will stop 

flashing. The symbol 

2

 will disappear as soon 

as the temperature in the freezer compartment 

is low enough.

This can be caused by:

•  the  freezer  door  being  left  open  for  a  long  time,  allowing  warm 

ambient air to enter;

•  a long power failure;

•  a fault in the appliance.
In each case, make sure food has not thawed or perished. If the alarm 

symbol does not go out, contact the customer service department 

(see section on 

Malfunctions

).

Switching the appliance on and off

Clean the interior of the appliance before switching it on for the first 

time (see 

Cleaning

).

To switch on

Press the On/Off button 

1

 to switch on the refrigerator compartment.

Press the On/Off button 

6

 to switch on the freezer compartment.

To switch off

Press the On/Off buttons for approx. two seconds.

Setting the temperature

The temperature of the refrigerator and freezer compartment can 

be set separately.

Setting the refrigerator temperature: 

Warmer temperature setting > press button 

bq

Colder temperature setting > press button 

bo

Setting the freezer temperature:

Warmer temperature setting > press button 

bm

Colder temperature setting > press button 

9

-  While you are setting the temperature, the temperature display 

will flash.

-  When  you  press  the  setting  buttons  for  the  first  time,  the  set 

temperature will be displayed.

-  You can change the settings in increments of 1°C by briefly press-

ing the buttons again.

-  About 5 seconds after the button was last pressed the average 

interior temperature will be displayed.

Adjustable temperature ranges

Refrigerator compartment: 11°C to 2°C

Freezer compartment: -14°C to -28°C

1 On/Off button, refrigerator 

compartment

2 Alarm symbol

3 SuperCool button

4 SuperFrost button 

5 SuperFrost symbol 

6 On/Off button, freezer com-

partment

7 Fan button 

8 Alarm button 

9 Down setting button, freezer 

compartment

10 Freezer compartment tem-

perature display

11 Up setting button, freezer 

compartment

12 Refrigerator compartment 

temperature display

13 Down setting button, refrigerator compartment

14 Fan symbol

15 Up setting button, refrigerator compartment

16 Child-proofing symbol

17 Power failure symbol

18 Menu symbol

19 Net@Home symbol

20 SuperCool symbol

Operating and control elements