Liebherr CBPesf 4013 Comfort BioFresh - Инструкция по эксплуатации - Страница 13

Холодильник Liebherr CBPesf 4013 Comfort BioFresh - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 14
Загружаем инструкцию
background image

u

Keep  the  appliance  closed  until  the  customer  service

arrives.

w

The food will stay cool longer.

u

Pull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

7 Malfunction

Your  appliance  is  designed  and  manufactured  for  a  long  life

span  and  reliable  operation.  If  a  malfunction  nonetheless

occurs  during  operation,  check  whether  it  is  due  to  a  handling

error.  In  this  case  you  will  have  to  be  charged  for  the  costs

incurred,  even  during  the  warranty  period.  You  may  be  able  to

rectify the following faults yourself:
Appliance does not work.

The appliance is not switched on.

u

Switch on the appliance.

The power plug is not properly inserted in the wall socket.

u

Check power plug.

The fuse of the wall socket is not in order.

u

Check fuse.

The compressor runs for a long time.

The compressor switches to a low speed when little cold is

needed. Although the running time is increased as a result,

energy is saved.

u

This is normal in energy-saving models.

SuperFrost is activated.

u

The  compressor  runs  for  longer  in  order  to  rapidly  cool  the

food. This is normal.

Excessive noise.

Speed-controlled*  compressors  may  produce  varying

running noise due to different speed steps.

u

The sound is normal.

A bubbling and gurgling noise.

This noise comes from the refrigerant flowing in the refriger-

ation circuit.

u

The sound is normal.

A quiet clicking noise.

The  noise  is  produced  whenever  the  refrigeration  unit

(motor) automatically switches on or off.

u

The sound is normal.

A hum. It is briefly a little louder when the refrigeration

unit (the motor) switches on.

The  refrigeration  increases  automatically  when  the  Super-

Frost, function is activated, fresh food has just been placed

in the appliance or the door has been left open for a while.

u

The sound is normal.

The ambient temperature is too high.

u

Solution: (see 1.2)

A low hum.

The sound is produced by air flow noise of the fan.

u

The sound is normal.

Vibratory noise.

The appliance is not standing firmly on the floor. As a result,

adjoining  units  or  objects  are  set  into  vibration  by  the

running refrigeration unit.

u

Move  the  appliance  away  a  little  and  align  it  using  the

adjustable feet.

u

Move bottles and containers apart.

The SuperFrost button flashes together with the tempera-

ture display.

There is a fault.

u

Contact the customer service. (see Maintenance).

The outside surfaces of the appliance are warm.

The  heat  of  the  refrigeration  circuit  is  used  to  prevent

condensate from forming.

u

This is normal.

The temperature is not cold enough.

The door of the appliance is not properly closed.

u

Close the door of the appliance.

Insufficient ventilation.

u

Clear ventilation grilles.

The ambient temperature is too high.

u

Solution: (see 1.2) .

The appliance was opened too frequently or for too long.

u

Wait  until  the  appliance  reaches  the  required  temperature

itself.  If  not,  contact  the  customer  service.  (see  Mainte-

nance).

Too much fresh food was placed inside without SuperFrost.

u

Solution: (see 5.4.4)

The appliance is too close to a heat source.

u

Solution: (see Putting into operation).

The interior light is not on.

The appliance is not switched on.

u

Switch on the appliance.

The door was open longer than 15 min.

u

The  interior  light  automatically  switches  off  if  the  door  has

been open for about 15 min.

If the interior light is not on but the temperature display is lit,

the bulb is faulty.

u

Change the bulb. (see Maintenance).

8 Decommissioning

8.1 Switching off the appliance

Note

u

To  switch  on  the  entire  appliance  it  is  necessary  only  to

switch off the freezer compartment. In so doing, the refriger-

ator compartment is automatically switched off as well.

8.1.1 Switching off the freezer compartment

u

Press  ON/OFF button, freezer compartment

 Fig. 3 (8) for at

least 3 seconds.

w

The  temperature  displays  are  dark.  The  entire  appliance  is

switched off.

8.1.2 Switching off the refrigerator compart-

ment

u

Press  ON/OFF  button,  refrigerator  compartment

  Fig.  3  (1)

for at least 3 seconds.

w

The interior light is off.

w

The  temperature  display  of  the  refrigerator  compartment  is

dark.

Note

u

If only the refrigerator compartment is to be switched off, e.g

during  holidays,  then  always  pay  attention:  the  freezer

compartment temperature display has to shine.

8.2 Taking the appliance out of service

u

Empty the appliance.

u

Pull out the power plug.

u

Clean the appliance (see 6.2) .

u

Leave the door open to prevent odour.

Malfunction

13

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Liebherr CBPesf 4013 Comfort BioFresh?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"